Skip to content

Kranzle Pressure Washers

Kranzle Pressure Washers for Car Detailing, Shops and Wash Bays

Not sure which machine fits the job? Answer a few quick questions and see the machines that fit, right here.

Prefer a person? Give us a call at (219) 327-1138. We are available Monday through Friday from 9AM to 6PM CST and one of our representatives will help you with what you're looking for.

Takes under a minute. No email needed to see results.

Kranzle is the pressure washer detailers ask for by name: German built electric units with brass pump heads, ceramic plungers, a total stop system that shuts the motor off when the trigger is released, and a pressure band, 1,400 to 2,500 PSI at 1.7 to 5 GPM, that cleans paint without harming it. The 18 Kranzle machines here run on a standard 120 volt outlet, on 230 volt single phase, or on three phase for the high flow units, and three of them, the Therm series, heat the water. Beside them are the Kranzle accessories built for the bayonet lance: the automatic hose reels, the UFO flat cleaner, the foam cannon, the spray guard, the Butler holder and the Colly sweeper. All ship new from Kranzle through High Pressure Car Washer, an authorized Kranzle dealer, with free shipping to the lower 48 states, to a dock or terminal on freight machines, and liftgate service for one flat fee.

The model number is the spec: K1622TS is 1,600 PSI, K2020T is 2,000 PSI with a hose reel, K2160TST is 2,320 PSI, K700TST is 2,500 PSI, KWS1200TS is 5 GPM. The guide under the products matches the models to a rented bay, a shop with a 230 volt circuit and a high volume wash bay, and every Kranzle machine also appears in electric pressure washers.

Electric pressure washersResidential machinesHot water unitsSteam capableKranzle hose reelsFoam cannonsUFO flat cleaner
Start here: the machine we would put on the truck for each job
Detailing on a standard outletKranzle K1622TS1,600 PSI at 1.7 GPM on a 120 volt 15 amp circuit, the model most detailers start on.Shops with 230 volt powerKranzle K2160TST2,320 PSI at 2.9 GPM on 230 volt single phase.High flow baysKranzle KWS1200TS5 GPM at 2,400 PSI on three phase for a bay that washes all day.Hot waterKranzle K2175TST2,500 PSI hot water or wet steam on 230 volt single phase.
Compare the kranzle pressure washers buyers ask about most
ModelPSIGPMPowerHeatFormBest for
Kranzle 1122TST1,4002.1Electric 120V 1 phaseCold waterPortableSmall bays, mobile detailing on 120 volt
Kranzle K1622TS1,6001.7Electric 120V 1 phaseCold waterPortableDetailing on a 15 amp outlet
Kranzle K2017T1,6001.7Electric 120V 1 phaseCold waterPortableDetailing with a hose reel, 15 amps
Kranzle K2020T2,0001.9Electric 120V 1 phaseCold waterPortableDetailing with a hose reel, 20 amps
Kranzle K2020PMUSR2,0001.9Electric 120V 1 phaseCold waterWall MountFixed bays, wall mount on 120 volt
Kranzle K499TST2,0001.9Electric 120V 1 phaseCold waterPortableDetailing, 2,000 PSI on 120 volt
Kranzle K599TST2,2002.5Electric 230V 1 phaseCold waterPortableShops, 2,200 PSI on 230 volt
Kranzle K2160TST2,3202.9Electric 230V 1 phaseCold waterPortableShops, 2,320 PSI on 230 volt
Kranzle K700TST2,5003.3Electric 230V 1 phaseCold waterPortableShops, 2,500 PSI on 230 volt
Kranzle KWS1200TS2,4005Electric 460V 3 phaseCold waterStationaryHigh flow bays, 5 GPM three phase
Kranzle K2175TST2,5003.3Electric 230V 1 phaseDiesel burnerPortableHot water and steam, 230 volt
Kranzle K1165TST2,4005Electric 230V 3 phaseDiesel burnerPortableHigh flow hot water, three phase
Filters

Kranzle pressure washers for car detailing

Detailing wants pressure under 2,500 PSI, 2 to 3 GPM, a machine that starts every time and a foam cannon fitting. Kranzle built its reputation on exactly that. On a standard outlet, the K1622TS at 1,600 PSI and 1.7 GPM and the K2020T at 2,000 PSI with a hose reel. With a 230 volt circuit, the K2160TST at 2,320 PSI and 2.9 GPM and the K700TST at 2,500 PSI and 3.3 GPM.

Kranzle 1122TST and K1622TS

The 1122TST at 1,400 PSI and 2.1 GPM is the compact 120 volt unit for a small bay or a mobile detailer working from a customer's outlet. The K1622TS adds pressure at 1,600 PSI and is the model most detailers start on; the K2017 and K399TST are the same class with different frames.

Kranzle electric pressure washers for shops

A shop with a 230 volt circuit gets the K599TST at 2,200 PSI, the K2160TST and the K700TST, and a wash bay that needs flow gets the KWS1200TS at 2,400 PSI and 5 GPM and the K1200TST on three phase. The K2020PMUSR is the wall mount for a fixed bay.

Kranzle Therm hot water units

The Therm K2175TST runs 2,500 PSI and 3.3 GPM of hot water or wet steam on 230 volt single phase, the dealership and detail shop hot water machine. The Therm K1165TST high flow units put 5 GPM through the coil on three phase. Both are in steam pressure washers.

Kranzle accessories

Kranzle uses its own bayonet quick release, and the accessories here fit it: the automatic retracting hose reels with or without 30 meters of hose, the UFO flat surface cleaner on wheels, the foam cannon, the 50 foot gray hose, the spray guard and the Butler holder that keeps the lance and gun off the floor.

Kranzle machines we recommend by job

Kranzle K1622TS for detailing on a standard outlet

The K1622TS is 1,600 PSI at 1.7 GPM on a 120 volt 15 amp circuit, the model most detailers start on.

Kranzle K2160TST for shops with 230 volt power

The K2160TST is 2,320 PSI at 2.9 GPM on 230 volt single phase.

Kranzle KWS1200TS for high flow bays

The KWS1200TS moves 5 GPM at 2,400 PSI on three phase for a bay that washes all day.

Kranzle K2175TST for hot water

The Therm K2175TST is 2,500 PSI hot water or wet steam on 230 volt single phase.

Freight, delivery and returns on machines

Free freight to the lower 48. Machines ship new from the manufacturer by freight carrier at no charge to a commercial address with a loading dock or forklift, or to the carrier's nearest terminal for pickup. Orders are prepared within 0 to 1 business days and delivery takes 5 to 8 business days.

Liftgate service, $95 flat. No dock or forklift? Choose liftgate service when you add the machine to the cart. The carrier calls ahead to schedule, brings the crate to your address and lowers it to the ground with a liftgate. It lands at the curb or driveway, not inside the building. One flat fee per order, whatever the machine weighs.

On delivery. Inspect the crate before signing. Note any damage on the delivery receipt and photograph it. We file the claim with the carrier, and if a replacement is needed we ship it.

Returns. Unused machines in original packaging can be returned within 30 days of delivery. A 20 percent restocking fee applies and return freight is the buyer's responsibility, and a refused freight delivery is handled the same way, which is why we would rather confirm the model before it ships: send the job, the water and the power on site through the form on this page and we check the spec against the machine. Full terms are on the shipping policy and return policy pages.

Not sure which machine fits the job? Answer a few quick questions and see the machines that fit, right here.

Prefer a person? Give us a call at (219) 327-1138. We are available Monday through Friday from 9AM to 6PM CST and one of our representatives will help you with what you're looking for.

Takes under a minute. No email needed to see results.

Kranzle Pressure Washers questions, answered

Why do detailers use Kranzle pressure washers?
The pressure band cleans paint without harming it, the total stop system shuts the motor off between cars so it lasts, the brass pump head and ceramic plungers run for years, and the machines start every time on a standard outlet.
Which Kranzle runs on a standard outlet?
The 1122TST, K1622TS, K2017, K2017T, K399TST, K499TST, K2020T and K2020PMUSR run on 120 volt at 15 or 20 amps as listed on each page. The 2,200 PSI and up units need 230 volt or three phase.
What does TST mean on a Kranzle?
Total stop system: the motor stops when the trigger is released and restarts when it is pulled, which saves the pump and the power bill. Models with a T carry a hose reel.
Does Kranzle make a hot water pressure washer?
Yes, the Therm series: the K2175TST on 230 volt single phase and the K1165TST high flow units on three phase, both with a steam mode.
Are you an authorized Kranzle dealer?
Yes. High Pressure Car Washer is an authorized dealer for Kranzle and five other brands, and every unit ships new from the manufacturer with its factory warranty.
How does shipping work?
Shipping is free to the lower 48 states. Machines ship new from the manufacturer by freight carrier to a commercial address with a dock or forklift, or to the carrier's nearest terminal for pickup. No dock? Choose liftgate service when you add the machine to the cart, a flat $95 per order, and the carrier calls ahead and lowers the crate to the ground at your address. Orders are prepared within 0 to 1 business days and delivery takes 5 to 8 business days.
What if I order the wrong machine?
Returns are accepted within 30 days of delivery on unused units in original packaging. A 20 percent restocking fee applies and return freight is the buyer's responsibility. Find My Machine and the phone line exist so the model is confirmed before it ships.