Skip to content

Pressure Washer Guns and Wands

Spray Guns, Wands and Extension Wands for Pressure Washers

The gun and the wand are what the operator holds all day, so a trigger that pulls easily and a wand of the right length matter more than they look. The eight pressure washer guns and wands here are Simpson commercial parts: spray guns rated to 3,400 and 5,000 PSI including a hot water gun with an easy pull trigger and a gun with a side assist handle, wands from 16 to 48 inches, a telescoping wand for second story work, and the Dial N Wash that adjusts pressure at the gun. All ship new from the manufacturer through High Pressure Car Washer, an authorized Simpson dealer, with free shipping to the lower 48 states.

Everything here uses 1/4 inch quick connects for the nozzle and 3/8 inch quick connects for the hose, which is the standard on the machines and hoses on this site. Pick the gun by rating and water temperature, the wand by reach, and add the tips from nozzles and tips. The guide under the products covers extension wands, short guns for detailing and what an insulated wand is for.

Compare the pressure washer guns and wands buyers ask about most
ModelTypeLengthRatingBest for
Simpson 80147Spray gunGun only3,400 PSIHomeowner and light commercial machines
Simpson 80148Spray gun, side assist handleGun onlySimpson ratedHigh flow units, two handed control
Simpson 80178Hot water spray gun, easy pullGun only5,000 PSIHot water machines, all day use
Simpson 80149Wand16 in3,600 PSIDetailing and tight spaces
Simpson 80479Wand31 in4,500 PSIEveryday length
Simpson 80179Insulated wand48 in5,000 PSIReach and hot water
Simpson 80470Telescoping wandExtendsSimpson ratedSecond story siding and gutters
Simpson 82232Dial N Wash pressure controlInline4,500 PSIOne machine for cars and concrete
Filters

Pressure washer spray guns

A gun is rated for pressure and for temperature. The Simpson 80147 covers machines to 3,400 PSI; the 80178 is rated to 5,000 PSI with an easy pull trigger and is the gun for hot water machines, where a stiff trigger and a hot grip wear an operator out by noon. The 80148 adds a side assist handle for two handed control on high flow units.

Extension wands and telescoping wands

A 31 inch wand is the everyday length. The 48 inch insulated wand reaches farther and keeps a hot water wand cool in the hand. For second story siding, gutters and signs, the Simpson 80470 telescoping wand extends to reach without a ladder and collapses for the truck.

Short wands for detailing and tight spaces

The 16 inch Simpson 80149 wand is the detailing length: it clears wheel wells, engine bays and the inside of a truck bed where a 31 inch wand cannot turn, and it is the wand to pair with a foam cannon.

The Dial N Wash

The Simpson 82232 Dial N Wash mounts between the gun and the wand and turns the pressure down at the gun, so one machine washes a car at low pressure and a driveway at full pressure without changing nozzles or walking to the unloader.

Quick connects

Guns take the hose on a 3/8 inch quick connect and the wand on a 1/4 inch quick connect; wands take the nozzle on a 1/4 inch quick connect. That is the standard across Simpson, Pressure-Pro and BE machines and every hose here. Kranzle machines use Kranzle fittings.

Guns and wands we recommend by job

Simpson 80178 for hot water machines

The Simpson 80178 5,000 PSI easy pull hot water spray gun is the gun for a hot water unit and a long day.

Simpson 80470 for second story work

The Simpson 80470 telescoping wand reaches upper siding and gutters without a ladder.

Simpson 80149 for detailing

The Simpson 80149 16 inch wand is the short wand for wheel wells, engine bays and foam cannons.

Simpson 82232 for one machine, many jobs

The Simpson 82232 Dial N Wash turns pressure down at the gun for cars and back up for concrete.

Shipping and returns on accessories

Free shipping to the lower 48. Hoses, reels, nozzles, guns and cleaners ship by ground at no charge. Orders are prepared within 0 to 1 business days and delivery takes 5 to 8 business days.

Fit before you order. Check the connection on your machine, quick connect or threaded, and the pressure rating of the part against your machine's PSI. The product page lists both, and a call to (219) 327-1138 confirms it.

Returns. Unused accessories in original packaging can be returned within 30 days of delivery. A 20 percent restocking fee applies and return shipping is the buyer's responsibility. Full terms are on the refund policy and shipping policy pages.

Pressure Washer Guns and Wands questions, answered

Will these guns fit my pressure washer?
They use 3/8 inch quick connects for the hose and 1/4 inch quick connects for the wand and nozzle, the standard on Simpson, Pressure-Pro and BE machines and on every hose here. Kranzle machines use Kranzle fittings.
Do I need a special gun for hot water?
Yes. A hot water gun is rated for temperature as well as pressure and has an insulated grip. The Simpson 80178 is rated to 5,000 PSI and built for hot water machines.
How long a wand should I use?
31 inches for general work, 48 inches for reach and hot water, 16 inches for detailing and tight spaces, and a telescoping wand for second story siding and gutters.
What is a Dial N Wash?
A pressure control that mounts between the gun and the wand and turns the pressure down at the gun, so one machine washes cars at low pressure and concrete at full pressure without changing tips.
How does shipping work on accessories?
Shipping is free to the lower 48 states by ground. Orders are prepared within 0 to 1 business days and delivery takes 5 to 8 business days. Accessories ordered with a machine ship separately by ground while the machine goes by freight.
Are these sold by an authorized dealer?
Yes. High Pressure Car Washer is an authorized dealer for BE Power Equipment, Cam Spray, Kranzle, Makinex, Pressure-Pro and Simpson, and everything ships new from the manufacturer with its factory warranty.
What if the part does not fit my machine?
Unused accessories in original packaging can be returned within 30 days of delivery. A 20 percent restocking fee applies and return shipping is the buyer's responsibility, so check the connection and the pressure rating on the product page first, or call (219) 327-1138 and we confirm the fit.