Skip to content

Makinex Pressure Washers

Makinex Dual Pressure Washers: Two Guns, One Machine

Not sure which machine fits the job? Answer a few quick questions and see the machines that fit, right here.

Prefer a person? Give us a call at (219) 327-1138. We are available Monday through Friday from 9:00 AM to 6:00 PM EST and one of our representatives will help you with what you're looking for.

Takes under a minute. No email needed to see results.

Makinex builds one idea well: a gas pressure washer with two outlets, so two operators wash from one machine at the same time and a crew finishes in half the trips. The three Makinex dual pressure washers here are the DPC-2200 at 2,200 PSI and 2.0 GPM, the DPW-2500 at 2,500 PSI and 2.5 GPM, and the DPW-4000 at 4,000 PSI and 4.0 GPM, all gas engine cold water units on a compact frame with hose reels built in. Rental fleets, event cleaning crews and contractors who run two people on a site buy them. All ship new from Makinex through High Pressure Car Washer, an authorized Makinex dealer, with free shipping to the lower 48 states, to a dock or terminal on freight machines, and liftgate service for one flat fee.

The flow splits between the two guns, so a 4 GPM machine gives each operator 2 GPM at full pressure, which suits vehicles, equipment, bins and flatwork with a surface cleaner on one gun. For a single operator who wants full flow, the same PSI classes in gas pressure washers are the comparison. The guide under the products covers what a dual machine is for and which of the three fits a crew.

Compare the makinex pressure washers buyers ask about most
ModelPSIGPMPowerHeatFormBest for
Makinex DPC-2200-US2,2002GasCold waterPortableRentals and events
Makinex DPW-2500-0A-HU-502,5002.5GasCold waterPortableVehicle and bin crews
Makinex DPW-4000-0A-HU-504,0004GasCold waterPortableConcrete and equipment crews
Filters

What a dual pressure washer is for

One engine, one pump, two outlets, two guns. Two operators wash at once from one fuel tank and one water supply, which is why rental companies and crews that clean vehicles, bins, event sites and equipment yards run Makinex: half the machines to move and maintain for the same output.

Makinex DPC-2200 and DPW-2500

The DPC-2200 at 2,200 PSI and 2.0 GPM and the DPW-2500 at 2,500 PSI and 2.5 GPM are the vehicle, bin and light equipment machines, in the pressure band that is safe on paint with a fan tip. Compact frames, built in hose reels, gas engines.

Makinex DPW-4000

The DPW-4000 at 4,000 PSI and 4.0 GPM is the concrete and equipment unit: two operators at 2 GPM each, or one operator with a surface cleaner and one with a wand on flatwork.

Makinex machines we recommend

Makinex DPC-2200 for rental fleets

The DPC-2200 is the entry dual unit for rentals and events.

Makinex DPW-2500 for vehicle crews

The DPW-2500 gives two operators 2,500 PSI for fleets and bins.

Makinex DPW-4000 for concrete and equipment

The DPW-4000 puts 4,000 PSI on two guns for flatwork and equipment.

Freight, delivery and returns on machines

Free freight to the lower 48. Machines ship new from the manufacturer by freight carrier at no charge to a commercial address with a loading dock or forklift, or to the carrier's nearest terminal for pickup. Orders are prepared within 0 to 1 business days and delivery takes 5 to 8 business days.

Liftgate service, $95 flat. No dock or forklift? Choose liftgate service when you add the machine to the cart. The carrier calls ahead to schedule, brings the crate to your address and lowers it to the ground with a liftgate. It lands at the curb or driveway, not inside the building. One flat fee per order, whatever the machine weighs.

On delivery. Inspect the crate before signing. Note any damage on the delivery receipt and photograph it. We file the claim with the carrier, and if a replacement is needed we ship it.

Returns. Unused machines in original packaging can be returned within 30 days of delivery. A 20 percent restocking fee applies and return freight is the buyer's responsibility, and a refused freight delivery is handled the same way, which is why we would rather confirm the model before it ships: send the job, the water and the power on site through the form on this page and we check the spec against the machine. Full terms are on the shipping policy and return policy pages.

Not sure which machine fits the job? Answer a few quick questions and see the machines that fit, right here.

Prefer a person? Give us a call at (219) 327-1138. We are available Monday through Friday from 9:00 AM to 6:00 PM EST and one of our representatives will help you with what you're looking for.

Takes under a minute. No email needed to see results.

Makinex Pressure Washers questions, answered

How does a dual pressure washer work?
One gas engine drives one pump with two outlets. Two operators wash at the same time, each with about half the machine's flow at full pressure.
Can one person use a Makinex dual machine?
Yes. Run one gun and cap the other outlet, or run a surface cleaner on one gun and a wand on the other for flatwork.
Who buys Makinex pressure washers?
Rental companies, event and venue cleaning crews, waste bin cleaners and contractors who put two people on a site with one machine to move.
Are you an authorized Makinex dealer?
Yes. High Pressure Car Washer is an authorized dealer for Makinex and five other brands, and every unit ships new from the manufacturer with its factory warranty.
How does shipping work?
Shipping is free to the lower 48 states. Machines ship new from the manufacturer by freight carrier to a commercial address with a dock or forklift, or to the carrier's nearest terminal for pickup. No dock? Choose liftgate service when you add the machine to the cart, a flat $95 per order, and the carrier calls ahead and lowers the crate to the ground at your address. Orders are prepared within 0 to 1 business days and delivery takes 5 to 8 business days.
What if I order the wrong machine?
Returns are accepted within 30 days of delivery on unused units in original packaging. A 20 percent restocking fee applies and return freight is the buyer's responsibility. Find My Machine and the phone line exist so the model is confirmed before it ships.