Skip to content

Wall Mount Pressure Washers

Wall Mounted Pressure Washers for Car Washes, Dealerships and Shop Bays

Not sure which machine fits the job? Answer a few quick questions and see the machines that fit, right here.

Prefer a person? Give us a call at (219) 327-1138. We are available Monday through Friday from 9:00 AM to 6:00 PM EST and one of our representatives will help you with what you're looking for.

Takes under a minute. No email needed to see results.

A wall mount pressure washer hangs the pump and motor on the wall of a bay, runs the hose to a reel and leaves the floor clear: nothing to trip over, nothing to run over with a car, and the water and power connected once. The 49 wall mounted units here run from 1,000 to 4,000 PSI and 1.6 to 5 GPM, all electric, from 120 volt units for a small bay to three phase units at 4,000 PSI, built by Cam Spray, Pressure-Pro, BE Power Equipment and Kranzle. All ship new from the manufacturer through High Pressure Car Washer, an authorized dealer for all four, with free shipping to the lower 48 states, to a dock or terminal on freight machines, and liftgate service for one flat fee.

Cam Spray builds 33 of the 49, in economy steel cabinets and deluxe stainless ones, cold water, on every voltage from 120 volt single phase to 460 volt three phase. Pressure-Pro adds the wall mount Eagle units, BE the X series wall mounts, and Kranzle the K2020PMUSR for a detail lane on a standard outlet. The guide under the products covers where a wall mount beats a portable, sizing for a car wash prep bay, and the electrical, and the picks name the unit for each bay. Stationary base mount units do the same job on a pad and are in electric pressure washers.

Cam SprayElectric pressure washersCars and detailingHose reelsHot water unitsCommercial range
Start here: the machine we would put on the truck for each job
Car wash prep baysCam Spray 1500WM1,500 PSI at 3 GPM on the wall for cars.Detail lane on a standard outletKranzle K2020PMUSR2,000 PSI at 1.9 GPM wall mount on 120 volt.Shop baysCam Spray 3000WM/SS3,000 PSI at 4 GPM in a stainless cabinet.Plants and equipmentCam Spray 4040EWM4,000 PSI at 4 GPM for the heavy end of the bay.
Compare the wall mount pressure washers buyers ask about most
ModelPSIGPMPowerHeatFormBest for
Pressure-Pro WM/EE3010G1,0003Electric 120V 1 phaseCold waterWall MountKennels and light rinse, 1,000 PSI
Pressure-Pro WM/EE2015G1,5002Electric 120V 1 phaseCold waterWall MountPrep bays on 120 volt
Kranzle K2020PMUSR2,0001.9Electric 120V 1 phaseCold waterWall MountDetail lanes on 120 volt
Cam Spray 1000WM1,0002Electric 120V 1 phaseCold waterWall MountLow pressure rinse stations
Cam Spray 1500WM1,5003Electric 230V 1 phaseCold waterWall MountCar wash prep bays
Cam Spray 2725EWM2,7002.5Electric 230V 1 phaseCold waterWall MountPrep bays, 2,700 PSI
BE X-2050FW1GENHT2,0004Electric 230V 1 phaseCold waterWall MountShops, 2,000 PSI 4 GPM
Cam Spray 2040EWM2,0004Electric 230V 1 phaseCold waterWall MountShops, 2,000 PSI 4 GPM economy
Cam Spray 2000WM/SS2,0004Electric 230V 1 phaseCold waterWall MountFood plants, stainless
Cam Spray 3040EWM3,0004Electric 230V 1 phaseCold waterWall MountShop bays, 3,000 PSI
Cam Spray 3000WM/SS3,0004Electric 230V 1 phaseCold waterWall MountShop bays, stainless
Cam Spray 4040EWM4,0004Electric 230V 1 phaseCold waterWall MountPlants and equipment, 4,000 PSI
Filters

Where a wall mount pressure washer makes sense

Anywhere the machine has a permanent home and the water and power are already there: a car wash prep bay, a dealership detail lane, a rental return lane, a fleet garage bay, a food plant wash station, a kennel. The machine never moves, so the hose does the moving, on a reel beside it. If the machine has to follow the work between bays or sites, buy a portable unit instead.

Wall mount pressure washers for car washes and detailing

A prep bay or detail lane wants 1,500 to 2,500 PSI at 2 to 4 GPM, which is the Cam Spray 1500 and 2000 series wall mounts, the Pressure-Pro WM/EE2015 and WM/EE4020 units, the BE X-1520 and X-2050 and the Kranzle K2020PMUSR. Add a reel from pressure washer hose reels and a 50 foot hose. See also pressure washers for cars and detailing.

Wall mount pressure washers for shops and plants

A shop bay, a fleet garage or a plant wash station wants 3,000 to 4,000 PSI at 4 to 5 GPM: the Cam Spray 3000WM, 3040 and 4040 wall mounts on 230 volt single phase or three phase. Stainless cabinets for food plants and wash down environments.

120 volt, 230 volt or three phase

The 1,000 to 2,000 PSI units run on 120 volt or 230 volt single phase; 3,000 PSI at 4 GPM needs 230 volt single phase with a 7.5 HP motor; 4,000 PSI and the 5 GPM units run on three phase. Cam Spray builds most models in more than one voltage, marked in the title, so match the model to the panel in the bay.

Installing a wall mount unit

Four lag bolts into a block wall or studs, a water supply that delivers the pump's GPM, a hard wired circuit or the plug listed on the product page, and a hose reel beside it. Most bays put the unit at chest height near the drain so the hose runs down and out.

Wall mount units we recommend by bay

Cam Spray 1500WM for car wash prep bays

The Cam Spray 1500WM deluxe wall mount puts 1,500 PSI and 3 GPM on the wall for cars.

Kranzle K2020PMUSR for a detail lane on a standard outlet

The Kranzle K2020PMUSR is a 2,000 PSI 1.9 GPM wall mount on 120 volt.

Cam Spray 3000WM/SS for shop bays

The Cam Spray 3000WM/SS puts 3,000 PSI and 4 GPM on the wall in a stainless cabinet.

Cam Spray 4040EWM for plants and equipment

The Cam Spray 4040EWM is 4,000 PSI at 4 GPM on the wall for the heavy end of the bay.

Freight, delivery and returns on machines

Free freight to the lower 48. Machines ship new from the manufacturer by freight carrier at no charge to a commercial address with a loading dock or forklift, or to the carrier's nearest terminal for pickup. Orders are prepared within 0 to 1 business days and delivery takes 5 to 8 business days.

Liftgate service, $95 flat. No dock or forklift? Choose liftgate service when you add the machine to the cart. The carrier calls ahead to schedule, brings the crate to your address and lowers it to the ground with a liftgate. It lands at the curb or driveway, not inside the building. One flat fee per order, whatever the machine weighs.

On delivery. Inspect the crate before signing. Note any damage on the delivery receipt and photograph it. We file the claim with the carrier, and if a replacement is needed we ship it.

Returns. Unused machines in original packaging can be returned within 30 days of delivery. A 20 percent restocking fee applies and return freight is the buyer's responsibility, and a refused freight delivery is handled the same way, which is why we would rather confirm the model before it ships: send the job, the water and the power on site through the form on this page and we check the spec against the machine. Full terms are on the shipping policy and return policy pages.

Not sure which machine fits the job? Answer a few quick questions and see the machines that fit, right here.

Prefer a person? Give us a call at (219) 327-1138. We are available Monday through Friday from 9:00 AM to 6:00 PM EST and one of our representatives will help you with what you're looking for.

Takes under a minute. No email needed to see results.

Wall Mount Pressure Washers questions, answered

Why buy a wall mount pressure washer instead of a portable one?
The floor stays clear, the connections are made once, and nothing gets run over. If the machine lives in one bay, wall mount. If it moves between bays or sites, portable.
What PSI wall mount do I need for a car wash?
1,500 to 2,500 PSI at 2 to 4 GPM for a prep bay or detail lane. 3,000 to 4,000 PSI for a shop bay, fleet garage or plant wash station.
Can a wall mount run on a standard outlet?
The 1,000 to 2,000 PSI units run on 120 volt or 230 volt single phase. 3,000 PSI needs 230 volt with a 7.5 HP motor and 4,000 PSI runs on three phase. Each product page lists the voltage.
Do wall mount pressure washers come with a hose reel?
No. The reel mounts beside the unit and holds the hose; Simpson and Kranzle reels are in the hose reels collection.
Can a wall mount unit run hot water?
The units here are cold water. Cam Spray's stationary hot water units, natural gas and propane fired, do the same fixed installation with heat and are in the hot water collection.
How does shipping work?
Shipping is free to the lower 48 states. Machines ship new from the manufacturer by freight carrier to a commercial address with a dock or forklift, or to the carrier's nearest terminal for pickup. No dock? Choose liftgate service when you add the machine to the cart, a flat $95 per order, and the carrier calls ahead and lowers the crate to the ground at your address. Orders are prepared within 0 to 1 business days and delivery takes 5 to 8 business days.
Are these machines sold by an authorized dealer?
Yes. High Pressure Car Washer is an authorized dealer for BE Power Equipment, Cam Spray, Kranzle, Makinex, Pressure-Pro and Simpson, and every unit ships new from the manufacturer with its factory warranty.
What if I order the wrong machine?
Returns are accepted within 30 days of delivery on unused units in original packaging. A 20 percent restocking fee applies and return freight is the buyer's responsibility. Find My Machine and the phone line exist so the model is confirmed before it ships.