Skip to content

4000 PSI Pressure Washers

4000 PSI Power Washers for Concrete, Heavy Equipment and Daily Contracting

Not sure which machine fits the job? Answer a few quick questions and see the machines that fit, right here.

Prefer a person? Give us a call at (219) 327-1138. We are available Monday through Friday from 9:00 AM to 6:00 PM EST and one of our representatives will help you with what you're looking for.

Takes under a minute. No email needed to see results.

4,000 PSI is where a pressure washer stops being a cleaning tool and becomes a stripping tool: caked mud off an excavator, oil stains out of concrete, paint and rust off steel, gum off a sidewalk. The 129 machines here run from 4,000 to 4,400 PSI, chosen from the whole catalog by pressure: 113 gas units from Simpson, Pressure-Pro, BE and Cam Spray at 3.5 to 5.5 GPM, 12 electric units for shops on 230 volt and three phase, three diesel units and a hydraulic drive unit, in portable, skid and trailer form, cold water and hot. All ship new from the manufacturer through High Pressure Car Washer, an authorized dealer for every brand here, with free shipping to the lower 48 states, to a dock or terminal on freight machines, and liftgate service for one flat fee.

At this pressure the flow decides the speed: a 4,000 PSI machine at 4 GPM does flatwork, at 5.5 GPM it does fleets and equipment, and a hot water 4,000 PSI unit does grease that cold water only moves. Belt drive pumps are the pick for a machine that runs every day. The guide under the products covers the 4,000 PSI class by job, gas versus electric at this pressure, and the hot water units, and the picks name the machine for each. For the 3,000 PSI class, see 3000 PSI pressure washers.

Gas pressure washersHot water unitsSkids and trailersHonda engine unitsSurface cleaners3000 PSI machines
Start here: the machine we would put on the truck for each job
Contractors on a budgetSimpson PS42404,200 PSI at 4.0 GPM on a Honda GX390.Daily crewsSimpson SRC44401114,400 PSI at 4.0 GPM belt drive inside a roll cage.ShopsCam Spray 4040EWM34,000 PSI at 4 GPM on the wall, three phase.Heavy equipmentPressure-Pro SK40005VH4,000 PSI at 5 GPM of hot water on a truck bed skid.
Compare the 4000 psi pressure washers buyers ask about most
ModelPSIGPMPowerHeatFormBest for
Simpson 608434,4004GasCold waterPortableConcrete on a budget, 4,400 PSI
Simpson PS42404,2004GasCold waterPortableContractors, Honda GX390
Pressure-Pro E4042KV-204,2004GasCold waterPortableContractors, Kohler engine
BE B4213HAAS4,2004.2GasCold waterPortableContractors, BE with Honda
Simpson SRC44401114,4004GasCold waterPortableDaily crews, belt drive roll cage
Cam Spray 4000HXS4,0003.5GasCold waterPortablePortable gas, Cam Spray
Cam Spray 4040EWM34,0004Electric 230V 3 phaseCold waterWall MountShops, wall mount three phase
Simpson KB651324,0004GasDiesel burnerPortableHot water on wheels, Honda
Pressure-Pro 4012-10G4,0004GasDiesel burnerPortableHot water on wheels, Pressure-Pro
Pressure-Pro SK40005VH4,0004.8GasDiesel burnerSkidHeavy equipment, hot skid
BE HW4024HA12V4,0005.5GasDiesel burnerSkidFleets, 5.5 GPM hot
Cam Spray 4055HT4,0005.5GasCold waterTrailerTow behind, 5.5 GPM
Filters

What a 4,000 PSI pressure washer is for

Concrete and pavers with a surface cleaner, heavy equipment and farm machinery, stripping paint and rust for prep, graffiti, gum and the jobs where a 3,000 PSI machine leaves a shadow. It is too much for cars, wood and siding up close; those jobs want the 2,500 to 3,400 PSI classes. Contractors buy 4,000 PSI because one machine covers every job they quote.

4,000 PSI gas pressure washers

107 of the 123 are gas, because 4,000 PSI at 4 GPM takes 13 to 16 horsepower: Honda GX390, Kohler CH440, Vanguard and Simpson CRX engines on triplex pumps. The Simpson PowerShot, Water Blaster and Super Pro units, the Pressure-Pro Eagle II, Dirt Laser and Pro lines, the BE B4213 units and the Cam Spray 4000 and 4040 gas portables. Direct drive for value, belt drive for daily use.

4,000 PSI electric pressure washers

Twelve electric units reach 4,000 PSI, and they need a 10 HP motor on three phase power or a 7.5 HP motor on 230 volt: the Cam Spray 4040 wall mounts and portables, the Pressure-Pro Pro-Max B4040 units and the BE X series. A shop with the circuit gets 4,000 PSI indoors with no exhaust.

4,000 PSI hot water pressure washers

The hot water class at 4,000 PSI is where fleets and equipment yards land: the Simpson King Brute, the Pressure-Pro Hot Shot and Dirt Laser units and skids, the BE HW4024 and HW4013 units, and the Cam Spray 4040 and 4055 hot units. See hot water pressure washers.

4,000 PSI at 4 GPM versus 5.5 GPM

4 GPM is the standard contractor pairing and runs from a good tap. 5 to 5.5 GPM at 4,000 PSI clears a truck or an excavator noticeably faster and wants a tank or a hydrant. Above that the machines are 8 GPM fleet units at 3,500 PSI, where flow beats pressure.

4,000 PSI machines we recommend by job

Simpson PS4240 for contractors on a budget

The Simpson PowerShot PS4240 is 4,200 PSI at 4.0 GPM on a Honda GX390.

Simpson SRC4440111 for daily crews

The Simpson SuperPro Roll Cage SRC4440111 is 4,400 PSI at 4.0 GPM with a belt drive pump inside a roll cage.

Cam Spray 4040EWM3 for shops

The Cam Spray 4040EWM3 wall mount puts 4,000 PSI and 4 GPM on the wall on three phase power.

Pressure-Pro SK40005VH for heavy equipment

The Pressure-Pro Dirt Laser SK40005VH is 4,000 PSI at 5 GPM of hot water on a truck bed skid.

Freight, delivery and returns on machines

Free freight to the lower 48. Machines ship new from the manufacturer by freight carrier at no charge to a commercial address with a loading dock or forklift, or to the carrier's nearest terminal for pickup. Orders are prepared within 0 to 1 business days and delivery takes 5 to 8 business days.

Liftgate service, $95 flat. No dock or forklift? Choose liftgate service when you add the machine to the cart. The carrier calls ahead to schedule, brings the crate to your address and lowers it to the ground with a liftgate. It lands at the curb or driveway, not inside the building. One flat fee per order, whatever the machine weighs.

On delivery. Inspect the crate before signing. Note any damage on the delivery receipt and photograph it. We file the claim with the carrier, and if a replacement is needed we ship it.

Returns. Unused machines in original packaging can be returned within 30 days of delivery. A 20 percent restocking fee applies and return freight is the buyer's responsibility, and a refused freight delivery is handled the same way, which is why we would rather confirm the model before it ships: send the job, the water and the power on site through the form on this page and we check the spec against the machine. Full terms are on the shipping policy and return policy pages.

Not sure which machine fits the job? Answer a few quick questions and see the machines that fit, right here.

Prefer a person? Give us a call at (219) 327-1138. We are available Monday through Friday from 9:00 AM to 6:00 PM EST and one of our representatives will help you with what you're looking for.

Takes under a minute. No email needed to see results.

4000 PSI Pressure Washers questions, answered

What can a 4,000 PSI pressure washer clean?
Concrete, pavers, heavy equipment, farm machinery, paint and rust for prep, graffiti and gum. It is too strong for cars, wood and siding up close.
Is 4,000 PSI too much for a driveway?
Not with a surface cleaner or a 25 degree tip at a working distance. It cleans a driveway faster than a 3,000 PSI unit; keep a narrow tip off soft pavers and joint sand.
Do I need gas for 4,000 PSI?
Usually. 4,000 PSI at 4 GPM takes 13 to 16 horsepower, which is a gas engine or a 10 HP three phase motor. Twelve electric units here reach it for shops with the circuit.
What GPM should a 4,000 PSI machine have?
4 GPM for contractors and flatwork from a tap, 5 to 5.5 GPM for fleets and equipment from a tank or hydrant.
Belt drive or direct drive at 4,000 PSI?
Belt drive for a machine that runs every day: the pump spins slower and lasts longer. Direct drive for a machine that runs a few hours a week.
How does shipping work?
Shipping is free to the lower 48 states. Machines ship new from the manufacturer by freight carrier to a commercial address with a dock or forklift, or to the carrier's nearest terminal for pickup. No dock? Choose liftgate service when you add the machine to the cart, a flat $95 per order, and the carrier calls ahead and lowers the crate to the ground at your address. Orders are prepared within 0 to 1 business days and delivery takes 5 to 8 business days.
Are these machines sold by an authorized dealer?
Yes. High Pressure Car Washer is an authorized dealer for BE Power Equipment, Cam Spray, Kranzle, Makinex, Pressure-Pro and Simpson, and every unit ships new from the manufacturer with its factory warranty.
What if I order the wrong machine?
Returns are accepted within 30 days of delivery on unused units in original packaging. A 20 percent restocking fee applies and return freight is the buyer's responsibility. Find My Machine and the phone line exist so the model is confirmed before it ships.