Skip to content
BE Power Equipment B2775EA electric pressure washer, front view

BE Power Equipment B2775EA 2,700 PSI 3.5 GPM 7.5 HP Electric Pressure Washer with Baldor Motor and CP Triplex Pump

$2,018.00 - $2,018.00
$2,018.00
$2,018.00 - $2,018.00
$2,018.00
In stock, ready to ship

This machine ships free by freight carrier to a commercial address with a loading dock or forklift, or to the carrier's terminal for pickup. Liftgate service brings the crate to your address and lowers it to the ground at the curb, one flat fee per order. Crated weight about 132 lb. Delivery takes 5 to 8 business days. Questions? Call (219) 327-1138.

Is this the right machine for my job?

Answer a few quick questions and see whether the BE B2775EA fits your job, your site and your water supply, or which machines fit better.

Takes under a minute. No email needed to see results.

The BE B2775EA is the single phase answer in the B2775 series for a shop without three phase wiring: a 7.5 HP Baldor motor on 240 volt drives an Centurion CTE2S triplex pump with ceramic plungers and a forged brass manifold to 2,700 PSI at 3.5 GPM, 9,450 cleaning units, on a mobile cart. It runs indoors with no exhaust for equipment, floors and vehicles, and ships without a cord or plug so a licensed electrician hard wires it to the circuit the bay already has.

BE B2775EA 2,700 PSI 3.5 GPM Electric Pressure Washer with 7.5 HP Baldor Motor on 240 volt Single Phase

The BE Power Equipment B2775EA delivers 2,700 PSI at 3.5 GPM on 240V single-phase power. For facilities without three-phase wiring, this is the single-phase option in the B2775 series. The 7.5 HP Baldor motor drives an Centurion CTE2S triplex pump with ceramic-coated plungers and a forged brass manifold. No cord or plug is included, and a licensed electrician must complete the wiring.

9,450 Cleaning Units on a Mobile Cart on the BE B2775EA

At 9,450 cleaning units per minute, this pressure washer strips coatings from concrete, cleans heavy equipment, and prepares surfaces for repainting. The external dump-to-ground bypass unloader keeps the pump cool between trigger pulls. The cart frame rolls on 12-inch flat-free tires at approximately 132 lbs, with quick-connect nozzles at 15, 25, and 40 degrees plus soap. The single-phase design simplifies installation for shops and wash facilities running on standard 240V circuits.

BE B2775EA Features

  • 7.5 HP Baldor motor delivers energy efficiency and reliability suited for commercial applications
  • Direct drive system connects the motor to the pump for a compact and efficient power transfer
  • Commercial grade Centurion triplex pump with die cast body, forged brass manifold, ceramic coated plungers and thermal release valve
  • External unloader provides enhanced cooling and can be set to dump to ground bypass water
  • High pressure hose, spray gun and wand assembly and spray nozzles included so it runs right out of the box
  • Powder coated steel frame with storage for accessories and 12 in flat free tires for rough terrain
  • Does not include a power cord, plug or switch; needs to be wired by an electrician

BE B2775EA Product Specifications

Pressure (PSI) 2,700 PSI
Flow Rate (GPM) 3.5 GPM
Motor 7.5 HP Baldor, electric motor
Pump Centurion CTE2S triplex (Die-cast body, forged brass manifold, ceramic-coated plungers)
Drive Type Direct drive
Unloader External, dump-to-ground bypass
Frame Powder-coated steel with built-in accessory storage
Wheels 12 in flat-free tires
Hose Length 50 ft x 3/8 in single wire braid with quick connects
Spray Gun & Wand 36 in insulated gun and wand with quick connect fittings
Nozzles Included Quick-connect nozzles (15 degrees, 25 degrees, 40 degrees, Soap)
Power Requirement Must be wired by a licensed electrician (no cord or plug included)
Shipping Weight 152 lbs boxed (146 lbs unit)
Dimensions 25 x 34 x 42 in unit (32 x 25 x 27 in boxed)
Recommended Use Commercial / Industrial
Note Actual product may vary slightly from images shown
Motor 7.5 HP Baldor, 1,725 RPM
Voltage 240 V, single phase
Amperage 32 A
Power Connection No cord, plug or switch; wired by a licensed electrician
Unloader External with 36 in hose, dump to ground bypass
Warranty Motor 2 years, pump 5 years

BE B2775EA What's In the Box

  • High-pressure hose
  • Spray gun wand
  • Quick-connect nozzles (15 degrees, 25 degrees, 40 degrees, Soap)

BE B2775EA Manuals and Documents

  • Return Eligibility: Within 30 days of delivery
  • Restocking Charges: 20% Restocking Fee
  • Refund Processing Time: Up to 9 days after approval
  • Return Shipping: Covered by the customer

Quick Overview:

  • Daily Cut-Off: Orders placed before 4:00 PM (CST) are handled the same business day. Orders submitted after this time will be queued for the next business day.
  • Preparation Time: Orders are prepared within 0 to 1 business days (Monday through Friday). During peak periods or special circumstances, this timeframe may be slightly extended.
  • Transit Estimate: Once shipped, delivery takes between 5 to 8 business days (Monday through Friday), depending on location and carrier operations.
  • Shipping Cost: Free shipping to the Continental U.S. (48 states). Machines that ship by freight carrier travel free to a commercial address with a loading dock or forklift, or to the carrier's terminal; liftgate service is a flat $95 per order, chosen above when you add the machine to the cart.
Free Shipping

Lower 48. Liftgate service available on freight machines.

30-Days Returns
SSL Encrypted Payments
Frequently Asked Questions (FAQs)

Welcome to High Pressure Car Washer! We're here to assist you in your journey to find the best pressure washer products. Please explore the sections below to find answers to common questions you might have.

Swipe to see more
What happens after I place an order?
An order confirmation email is sent as soon as the order is placed. Orders placed before 4:00 PM CST on a business day are handled the same day, and orders placed after that time are handled the next business day. Preparation takes 0 to 1 business days, Monday through Friday. When the order leaves, a shipping confirmation email with tracking details follows.
Missing Tracking Email?
Tracking details are emailed automatically when an order ships, and orders are prepared within 0 to 1 business days, so tracking normally arrives within 3 business days of ordering. If it has not, the spam folder is the first place to check. After that, a message to support@highpressurecarwasher.com with the order number, or a note through the Contact page, lets us confirm the email address on file and check the shipment.
Shipping Time Guarantees
Delivery times are estimates rather than guarantees. Transit normally takes 5 to 8 business days after an order ships, but the destination and carrier schedules can extend that. When a delivery runs past the estimate, an additional 2 to 3 business days is the normal allowance. If the package still has not arrived after that, contacting us with the order number starts a trace with the carrier.
What is your return policy?
Returns are accepted within 30 days of the delivery date. Items must be unused, in their original condition and in their original packaging. A return starts with an email to support@highpressurecarwasher.com that includes the order number and the reason for the return; the return address and instructions are sent back from there. Return shipping is paid by the customer, and approved returns carry a 20 percent restocking fee, which is waived for items that arrived damaged, defective or incorrect. Once the returned item has been received and approved, the refund is issued to the original payment method within 9 days.
Damaged or Defective Items
Damaged and defective items are replaced or corrected. The process starts with an email to support@highpressurecarwasher.com that includes the order number and clear photos of the item and its packaging. Each case is reviewed promptly, and a replacement or correction is arranged from there. No restocking fee applies to items that arrived damaged, defective or incorrect.
Where to Find the Full Return Policy?
The complete Return and Refund Policy and the Shipping Policy are linked in the footer of every page and in the Help menu. The same return terms also appear on every product page under Return Details.
Is there a shipping fee?
Shipping is free to the 48 continental states. Accessories and portable machines ship by ground at no charge. Machines that ship by freight carrier travel free to a commercial address with a loading dock or forklift, or to the carrier's terminal for pickup. Liftgate service, which lowers the crate to the ground at your address, is a flat $95 per order, chosen when you add the machine to the cart. Orders for Alaska, Hawaii or addresses outside the 48 states are handled case by case, so customers in those areas are asked to contact us before ordering.
Can I track my order?
Every order is trackable. When an order ships, a shipping confirmation email goes out with the tracking details, and the package can be followed from that link until delivery. If no tracking email has arrived within 3 business days of ordering, a message to support@highpressurecarwasher.com with the order number lets us check the shipment.
How will my product be shipped?
The shipping method depends on the size of the item. Accessories and smaller units travel with a parcel carrier at no charge. Large machines are strapped to a pallet and shipped by LTL freight: free to a commercial address with a dock or forklift, or to the carrier's terminal for pickup, with liftgate service available for a flat $95 per order. Freight deliveries should be received in person so the shipment can be inspected on arrival, and any visible damage should be written on the delivery receipt before it is signed.
What should I consider before making a purchase?
The specifications on each product page are the starting point: PSI and GPM determine cleaning power, the power source and, for electric units, the voltage and phase determine where the machine can run, and the water temperature determines what it can clean. Matching those specifications to the intended work matters, because High Pressure Car Washer cannot be responsible for a machine used for a purpose it was not specified for. Help choosing the right unit is available before ordering by email or phone.
Additional Considerations
Two details deserve a look before ordering. The full specifications on the product page confirm the machine's capabilities, and the Emission Compliance Notice shows whether an engine-driven unit can be sold or shipped to California, since some cannot. Questions can be sent to support@highpressurecarwasher.com or asked by phone at (219) 327-1138, Monday through Friday, 9:00 am to 6:00 pm CST.
What should I expect after placing an order?
An order confirmation email arrives right after checkout. The payment method is charged at checkout, and the order enters processing, where it is prepared for shipment. Changes and cancellations are possible only before processing begins; once an order is in processing or has shipped, the return process applies after delivery.
Shipping Timeframes
Orders are prepared within 0 to 1 business days, Monday through Friday. After dispatch, delivery takes 5 to 8 business days depending on the destination and the carrier. Tracking details are emailed when the order ships.
Inspecting Your Delivery
Packaging should be inspected when a delivery arrives. If damage is visible, photographs of the packaging taken before it is opened and sent to support@highpressurecarwasher.com with the order number allow the claim to be handled quickly. For freight deliveries, any damage should also be noted on the driver's delivery receipt before it is signed.
Missing Parts or Damaged Deliveries
The contents of every delivery should be checked on arrival. If an item is damaged or a part is missing, an email to support@highpressurecarwasher.com with photos and the order number is all that is needed; a replacement or correction is arranged from there.
Tracking Information
Tracking numbers are sent by email when orders ship. If none has arrived within 3 business days of placing an order, contacting us allows the email address on file to be confirmed and the shipment to be checked.
Are you an authorized dealer for your products?
Yes, we are proud to be authorized dealers for the brands we support.
What is your privacy policy?
The Privacy Policy describes what information High Pressure Car Washer collects, how that information is used and how it is protected. It is linked in the footer of every page and in the Help menu, and questions about it can be sent to support@highpressurecarwasher.com.

Can't find what you're looking for? Our team is here to help.

Contact Support