BE Power Equipment B3165HC 3,100 PSI 3.1 GPM Cold Water Gas Pressure Washer
Steel-Frame Pressure Washer with Comet Pump
The BE Power Equipment B3165HC puts a Comet commercial-grade triplex pump behind a Honda GX200 196cc engine, all mounted on a powder-coated steel frame with onboard accessory storage. The steel construction adds durability for job sites where equipment gets bumped, stacked, and hauled in open trailers. Output sits at 3,100 PSI and 3.1 GPM, suitable for concrete cleaning, deck prep, and equipment degreasing.
Built-In Unloader and Rough-Terrain Tires
The Comet pump includes a built-in unloader valve that regulates bypass pressure when the trigger releases, protecting the pump from thermal damage during pauses. The 10-inch flat-free tires handle gravel, dirt, and uneven ground without going flat on job sites. A 50-foot steel braided hose provides working distance, and the powder-coated steel frame holds up against the elements season after season.
Product Specifications
| Pressure (PSI) | 3,100 PSI |
| Flow Rate (GPM) | 3.1 GPM |
| Engine | Honda GX200 196cc OHV commercial-grade engine |
| Pump | Comet commercial-grade triplex pump with built-in unloader |
| Hose Length | 50-foot high-pressure steel braided hose |
| Spray Wand & Gun | 36” insulated spray wand with ergonomic trigger gun |
| Spray Nozzles Included | 4 quick-connect nozzles - 15 degrees , 25 degrees , 40 degrees , and soap |
| Frame | Powder-coated steel frame with accessory storage |
| Wheels | 10” flat-free tires for rough terrain |
| Fuel Tank | Large capacity for longer runtime |
| Safety Features | Automatic low oil shutdown and thermal relief valve |
| Warranty | 3-year limited |
| Factory Testing | All units tested for functionality before shipping |
Emission Compliance Notice
This product is equipped with a Honda engine rated as 49-state compliant (EPA approved). This engine does not meet California Air Resources Board (CARB) emission standards. This model is not available for sale or shipment to California.
What's In the Box
- Spray gun
- Wand assembly
- 4 quick-connect nozzles
Manuals and Documents
- Return Eligibility: Within 35 days of delivery
- Restocking Charges: None applied
- Refund Processing Time: Up to 9 days after approval
- Return Shipping: Covered by the customer
Quick Overview:
- Daily Cut-Off: Orders placed before 4:00 PM (MDT) are handled the same business day. Orders submitted after this time will be queued for the next business day.
- Preparation Time: Orders are prepared within 0–1 business days (Monday–Friday). During peak periods or special circumstances, this timeframe may be slightly extended.
- Transit Estimate: Once shipped, delivery takes between 5–8 business days (Monday–Friday), depending on location and carrier operations.
- Shipping Cost: We offer complimentary shipping on all orders within the United States.