BE Power Equipment HW3024HG12V hot water pressure washer skid, front view

BE Power Equipment HW3024HG12V 3,000 PSI 8.0 GPM Hot Water Pressure Washer with Honda GX690 Engine and General Triplex Pump

$10,388.00 - $10,388.00

$10,388.00

$10,388.00 - $10,388.00

$10,388.00

In stock, ready to ship

Liftgate Service*

This machine ships free by freight carrier to a commercial address with a loading dock or forklift, or to the carrier's terminal for pickup. Liftgate service brings the crate to your address and lowers it to the ground at the curb, one flat fee per order. Crated weight about 975 lb. Delivery takes 5 to 8 business days. Questions? Call (219) 327-1138.

Is this the right machine for my job?

Answer a few quick questions and see whether the BE HW3024HG12V fits your job, your site and your water supply, or which machines fit better.

Takes under a minute. No email needed to see results.

Eight gallons a minute is the number on the BE HW3024HG12V: 3,000 PSI at 8.0 GPM, 24,000 cleaning units, with a 12 volt Beckett diesel burner heating water to 200 degrees, so a trailer, a wide slab or a plant floor rinses in far fewer passes than a 4 GPM unit. A Honda GX690 V twin with electric start drives a belt driven General triplex pump, a 55 amp hour AGM battery is included, and the 975 pound roll cage skid is built to bolt into a truck bed or onto a trailer.

BE HW3024HG12V 3,000 PSI 8.0 GPM Hot Water Pressure Washer with Honda GX690 Electric Start and Belt Driven General Triplex Pump

The BE Power Equipment HW3024HG12V pushes 8.0 GPM at 3,000 PSI with water heated to 200 degrees Fahrenheit, producing 24,000 cleaning units per minute. The 8.0 GPM flow rate is the key differentiator on this unit. High-volume water output rinses large surfaces faster, flushes debris from wide concrete areas, and covers more square footage per hour than lower-GPM models at the same pressure. The 12V Beckett diesel-fired burner handles grease, oil, and organic contamination on industrial floors, heavy equipment, and commercial kitchens.

Honda GX690 V-Twin with Belt-Driven General Triplex Pump on the BE HW3024HG12V

The Honda GX690 V-Twin engine with electric start powers a belt-driven General triplex pump with a reinforced body, forged brass manifold, and ceramic plungers. The belt-drive system absorbs vibration and reduces direct stress on the pump, extending service life under the high demands of 8.0 GPM output. A 55AH marine AGM battery is included for the electric start and 12V burner system.

975-Pound Skid Frame for Truck or Trailer Mounting on the BE HW3024HG12V

The HW3024HG12V rides on a powder-coated 1.5-inch OD steel roll cage frame built for permanent truck or trailer installation. At 975 pounds and 48 x 46 x 51 inches, this is a dedicated mobile cleaning rig. Oil drain hoses installed on both the engine and pump simplify field maintenance without removing the unit from its mounting.

BE HW3024HG12V Product Specifications

Pressure (PSI)	3,000 PSI
Flow Rate (GPM)	8.0 GPM
Engine	Honda GX690 V-Twin with electric start
Pump	General triplex pump - reinforced body, forged brass manifold, ceramic plungers
Drive Type	Belt-driven
Unloader	External
Burner	12V Beckett, diesel-fueled
Maximum Temperature	200 degrees F / 93 degrees C
Battery	55AH Marine AGM included
Thermostat	Adjustable with rocker switch control
Hose Length	50-ft steel-braided hose
Spray Gun & Wand	Insulated gun/wand
Nozzles Included	5 quick connect spray nozzles
Frame	Powder-coated 1.5 in OD steel roll cage
Oil Drain Hoses	On engine and pump
Mounting	Truck or trailer compatible
Weight	975 lbs
Dimensions	48 in x 46 in x 51 in
Units per Pallet	1

The actual product may differ slightly from the images shown on the website due to ongoing improvements. All BE Power Equipment pressure washers are factory tested prior to shipping and may contain residual oil or fuel.

BE HW3024HG12V What's In the Box

Spray gun
Wand assembly

Emission Compliance Notice

This BE Power Equipment product is equipped with a Honda engine rated as 49-state compliant (EPA approved). This engine does not meet California Air Resources Board (CARB) emission standards. This model is not available for sale or shipment to California.

BE HW3024HG12V Manuals and Documents

BE HW3024HG12V owner's manual (PDF)

Return Details

Return Eligibility: Within 30 days of delivery
Restocking Charges: 20% Restocking Fee
Refund Processing Time: Up to 9 days after approval
Return Shipping: Covered by the customer

Shipping Details

Quick Overview:

Daily Cut-Off: Orders placed before 4:00 PM (CST) are handled the same business day. Orders submitted after this time will be queued for the next business day.
Preparation Time: Orders are prepared within 0 to 1 business days (Monday through Friday). During peak periods or special circumstances, this timeframe may be slightly extended.
Transit Estimate: Once shipped, delivery takes between 5 to 8 business days (Monday through Friday), depending on location and carrier operations.
Shipping Cost: Free shipping to the Continental U.S. (48 states). Machines that ship by freight carrier travel free to a commercial address with a loading dock or forklift, or to the carrier's terminal; liftgate service is a flat $95 per order, chosen above when you add the machine to the cart.

Free Shipping

Lower 48. Liftgate service available on freight machines.

30-Days Returns

SSL Encrypted Payments

Frequently Asked Questions (FAQs)

Welcome to High Pressure Car Washer! We're here to assist you in your journey to find the best pressure washer products. Please explore the sections below to find answers to common questions you might have.

Swipe to see more

What happens after I place an order?

An order confirmation email is sent as soon as the order is placed. Orders placed before 4:00 PM CST on a business day are handled the same day, and orders placed after that time are handled the next business day. Preparation takes 0 to 1 business days, Monday through Friday. When the order leaves, a shipping confirmation email with tracking details follows.

Missing Tracking Email?

Tracking details are emailed automatically when an order ships, and orders are prepared within 0 to 1 business days, so tracking normally arrives within 3 business days of ordering. If it has not, the spam folder is the first place to check. After that, a message to support@highpressurecarwasher.com with the order number, or a note through the Contact page, lets us confirm the email address on file and check the shipment.

Shipping Time Guarantees

Delivery times are estimates rather than guarantees. Transit normally takes 5 to 8 business days after an order ships, but the destination and carrier schedules can extend that. When a delivery runs past the estimate, an additional 2 to 3 business days is the normal allowance. If the package still has not arrived after that, contacting us with the order number starts a trace with the carrier.

What is your return policy?

Returns are accepted within 30 days of the delivery date. Items must be unused, in their original condition and in their original packaging. A return starts with an email to support@highpressurecarwasher.com that includes the order number and the reason for the return; the return address and instructions are sent back from there. Return shipping is paid by the customer, and approved returns carry a 20 percent restocking fee, which is waived for items that arrived damaged, defective or incorrect. Once the returned item has been received and approved, the refund is issued to the original payment method within 9 days.

Damaged or Defective Items

Damaged and defective items are replaced or corrected. The process starts with an email to support@highpressurecarwasher.com that includes the order number and clear photos of the item and its packaging. Each case is reviewed promptly, and a replacement or correction is arranged from there. No restocking fee applies to items that arrived damaged, defective or incorrect.

Where to Find the Full Return Policy?

The complete Return and Refund Policy and the Shipping Policy are linked in the footer of every page and in the Help menu. The same return terms also appear on every product page under Return Details.

Is there a shipping fee?

Shipping is free to the 48 continental states. Accessories and portable machines ship by ground at no charge. Machines that ship by freight carrier travel free to a commercial address with a loading dock or forklift, or to the carrier's terminal for pickup. Liftgate service, which lowers the crate to the ground at your address, is a flat $95 per order, chosen when you add the machine to the cart. Orders for Alaska, Hawaii or addresses outside the 48 states are handled case by case, so customers in those areas are asked to contact us before ordering.

Can I track my order?

Every order is trackable. When an order ships, a shipping confirmation email goes out with the tracking details, and the package can be followed from that link until delivery. If no tracking email has arrived within 3 business days of ordering, a message to support@highpressurecarwasher.com with the order number lets us check the shipment.

How will my product be shipped?

The shipping method depends on the size of the item. Accessories and smaller units travel with a parcel carrier at no charge. Large machines are strapped to a pallet and shipped by LTL freight: free to a commercial address with a dock or forklift, or to the carrier's terminal for pickup, with liftgate service available for a flat $95 per order. Freight deliveries should be received in person so the shipment can be inspected on arrival, and any visible damage should be written on the delivery receipt before it is signed.

What should I consider before making a purchase?

The specifications on each product page are the starting point: PSI and GPM determine cleaning power, the power source and, for electric units, the voltage and phase determine where the machine can run, and the water temperature determines what it can clean. Matching those specifications to the intended work matters, because High Pressure Car Washer cannot be responsible for a machine used for a purpose it was not specified for. Help choosing the right unit is available before ordering by email or phone.

Additional Considerations

Two details deserve a look before ordering. The full specifications on the product page confirm the machine's capabilities, and the Emission Compliance Notice shows whether an engine-driven unit can be sold or shipped to California, since some cannot. Questions can be sent to support@highpressurecarwasher.com or asked by phone at (219) 327-1138, Monday through Friday, 9:00 am to 6:00 pm CST.

What should I expect after placing an order?

An order confirmation email arrives right after checkout. The payment method is charged at checkout, and the order enters processing, where it is prepared for shipment. Changes and cancellations are possible only before processing begins; once an order is in processing or has shipped, the return process applies after delivery.

Shipping Timeframes

Orders are prepared within 0 to 1 business days, Monday through Friday. After dispatch, delivery takes 5 to 8 business days depending on the destination and the carrier. Tracking details are emailed when the order ships.

Inspecting Your Delivery

Packaging should be inspected when a delivery arrives. If damage is visible, photographs of the packaging taken before it is opened and sent to support@highpressurecarwasher.com with the order number allow the claim to be handled quickly. For freight deliveries, any damage should also be noted on the driver's delivery receipt before it is signed.

Missing Parts or Damaged Deliveries

The contents of every delivery should be checked on arrival. If an item is damaged or a part is missing, an email to support@highpressurecarwasher.com with photos and the order number is all that is needed; a replacement or correction is arranged from there.

Tracking Information

Tracking numbers are sent by email when orders ship. If none has arrived within 3 business days of placing an order, contacting us allows the email address on file to be confirmed and the shipment to be checked.

Are you an authorized dealer for your products?

Yes, we are proud to be authorized dealers for the brands we support.

What is your privacy policy?

The Privacy Policy describes what information High Pressure Car Washer collects, how that information is used and how it is protected. It is linked in the footer of every page and in the Help menu, and questions about it can be sent to support@highpressurecarwasher.com.