BE Power Equipment HW4013HC 4,000 PSI - 4.0 GPM Hot Water Pressure Washer with Honda GX390 Engine and Comet Triplex Pump
4,000 PSI Hot Water Pressure Washer with Comet Triplex Pump
The BE Power Equipment HW4013HC delivers 4,000 PSI at 4.0 GPM with 300,000 BTU heating capacity through a 12V Beckett diesel-fired burner, raising water temperature up to 200 degrees Fahrenheit. The Comet ZWD4040 triplex pump sets this model apart from other 4,000 PSI units in the BE lineup that use General or AR pumps. At approximately 530 pounds on 12-inch ultra-premium flat-free tires, the HW4013HC is a wheeled cart unit built for contractors who need to move between job sites.
Honda GX390 Engine for 4,000 PSI Output
The Honda GX390 389cc engine powers the Comet ZWD4040 triplex pump through sustained high-pressure operation. The external unloader valve protects the pump during trigger release by redirecting water flow and reducing heat buildup. A 55AH AGM deep cycle battery runs the electric start and the 12V diesel burner. The 50-foot double braided steel wire hose with quick connects, 36-inch insulated spray wand, and four quick-connect nozzles are included.
Product Specifications
| Pressure (PSI) | 4,000 |
| Flow Rate (GPM) | 4.0 |
| Engine | Honda GX390 389cc |
| Pump | Comet ZWD4040 Triplex |
| Unloader | External |
| Burner | 12V Beckett diesel-fired |
| BTU Output | 300,000 (via heating coil) |
| Temperature Range | Up to 200 degrees F (93 degrees C) |
| Battery | 55 AH AGM deep cycle included |
| Thermostat | Adjustable with rocker switch control |
| Hose Length | 50-ft double braided steel wire, quick connect |
| Spray Gun & Wand | 36" insulated assembly |
| Nozzles Included | 4 QC spray tips (0 degrees , 15 degrees , 40 degrees , soap) |
| Frame | Powder-coated steel |
| Wheels | 12" ultra-premium flat-free |
| Weight | Approx. 530 lbs |
| Dimensions | 48" x 32" x 46" |
Emission Compliance Notice
This product is equipped with a Honda engine rated as 49-state compliant (EPA approved). This engine does not meet California Air Resources Board (CARB) emission standards. This model is not available for sale or shipment to California.
What's In the Box
- Spray gun
- Wand assembly
- 5 quick-connect nozzles
Manuals and Documents
- Return Eligibility: Within 35 days of delivery
- Restocking Charges: None applied
- Refund Processing Time: Up to 9 days after approval
- Return Shipping: Covered by the customer
Quick Overview:
- Daily Cut-Off: Orders placed before 4:00 PM (MDT) are handled the same business day. Orders submitted after this time will be queued for the next business day.
- Preparation Time: Orders are prepared within 0–1 business days (Monday–Friday). During peak periods or special circumstances, this timeframe may be slightly extended.
- Transit Estimate: Once shipped, delivery takes between 5–8 business days (Monday–Friday), depending on location and carrier operations.
- Shipping Cost: We offer complimentary shipping on all orders within the United States.