Cam Spray 1502WM/SSA 120 volt stainless steel wall mount cold water pressure washer, angled view

Cam Spray 1502WM/SSA Pressure Washer Electric Powered Deluxe Wall Mount Cold Water 2 GPM 1,500 PSI Auto Start/Stop

$3,124.18 - $3,124.18

$3,124.18

$3,124.18 - $3,124.18

$3,124.18

In stock, ready to ship

Liftgate Service*

This machine ships free by freight carrier to a commercial address with a loading dock or forklift, or to the carrier's terminal for pickup. Liftgate service brings the crate to your address and lowers it to the ground at the curb, one flat fee per order. Crated weight about 165 lb. Delivery takes 5 to 8 business days. Questions? Call (219) 327-1138.

Is this the right machine for my job?

Answer a few quick questions and see whether the Cam Spray 1502WM/SSA fits your job, your site and your water supply, or which machines fit better.

Takes under a minute. No email needed to see results.

The Cam Spray 1502WM/SSA is the stainless wall mount that runs on a standard 120 volt 20 amp circuit: a 2 HP motor with auto start and stop drives the triplex pump to 1,500 PSI at 2 GPM, so a veterinary clinic, a small wash bay or a maintenance closet gets a permanent washer without rewiring for 230 volt. The full stainless steel frame handles wet and corrosive rooms, a dual chemical valve switches between two detergents, and a 35 foot GFCI cord and a 50 foot hose come with it.

Cam Spray 1502WM/SSA 1,500 PSI 2 GPM Electric Stainless Steel Deluxe Wall Mount Cold Water Pressure Washer with Auto Start and Stop, 120 Volt

Where the 1500WM/SSA requires 230-volt wiring, the Cam Spray 1502WM/SSA runs on a standard 120-volt, 20-amp circuit while still delivering 1,500 PSI. Flow rate is 2 GPM through a stainless steel wall mount frame with auto start/stop. This makes it a practical choice for facilities that need hot water-free cleaning power without rewiring for higher voltage.

120-Volt Convenience with Stainless Steel Durability on the Cam Spray 1502WM/SSA

The 2 HP enclosed motor with thermal overload protection pairs with the auto start/stop feature, so the motor only runs when the trigger is pulled. The full stainless steel frame handles wet, corrosive environments where painted frames fail. Weighing 165 pounds and measuring 23 x 16 x 31 inches, the 1502WM/SSA fits small wash bays, veterinary clinics, and maintenance closets.

Triplex Plunger Pump with Dual Chemical Valve on the Cam Spray 1502WM/SSA

The industrial triplex plunger pump features ceramic plungers and stainless steel valves for durability under continuous use. A 35-foot power cord with GFCI protection and a 50-foot by 3/8-inch hose provide working range. The dual chemical valve toggles between two detergent concentrates, and Q-Meg nozzle tips in 0, 15, 25, and 40 degree patterns come included.

Cam Spray 1502WM/SSA Features

Popular Design: Deluxe Wall Mount cold water electric-powered unit, a Cam Spray favorite for over 25 years.
Durable Construction: Made with a full stainless steel frame for tough environments.
Wall-Mount Design: Easily mounts to walls using a permanently installed bracket and slide-in frame design.
Convenient Storage: Features two hooks for hose and trigger gun storage, plus grommets on the cover for Q-Meg nozzle storage.
Dual Chemical Valve: Offers the ability to switch between two detergent concentrates and adjust the detergent proportion.
Industrial Motor: Totally enclosed and thermal overload protected for reliable operation.
Triplex Plunger Pump: Features ceramic plungers and stainless steel valves for durability and high performance.
Auto Start/Stop Function: Starts and stops the motor automatically when the trigger is pulled or released.
Efficient Detergent Dispensing: Uses low-pressure chemical injection activated by the soap tip for applying liquid detergents.
Accessories Included: Comes with 0 degrees, 15 degrees, 25 degrees, and 40 degrees Q-Meg tips and a trigger gun.
Powerful Cleaning: Provides 1,500 PSI pressure for effective and reliable performance.
Attention CA Residents: Prop 65 Warning

Cam Spray 1502WM/SSA Specifications

Availability	Cam Spray ReadyShip model, usually ships from factory stock
Water Type	Cold
Powered By	Electric Motor
Mounting Type	Wall Mount
Flow Rate (GPM / LPM)	2 / 7.65
Horsepower	2
Product Dimensions	23 in × 16 in × 31 in
Voltage / Amperage / Phase	120 Volt / 20 Amp / 1
Pump Thermal Protection	Mechanical
Max Pump Inlet Water Temp	160 degrees F
Hose Dimension	50 ft × 3/8 in
Power Cord	35 ft with GFCI
Ship Weight	165
Pressure (PSI / Bar)	1500 / 103.5
Max PSI	1,500 PSI
Flow Rate (GPM)	2 GPM
Voltage	120V
Amperage	20A
Phase	Single
Fuel Type	Electric
Pump Type	Triplex Plunger

Cam Spray 1502WM/SSA Manuals and Documents

Cam Spray 1502WM/SSA electric cold water pressure washer manual (PDF)

Return Details

Return Eligibility: Within 30 days of delivery
Restocking Charges: 20% Restocking Fee
Refund Processing Time: Up to 9 days after approval
Return Shipping: Covered by the customer

Shipping Details

Quick Overview:

Daily Cut-Off: Orders placed before 4:00 PM (CST) are handled the same business day. Orders submitted after this time will be queued for the next business day.
Preparation Time: Orders are prepared within 0 to 1 business days (Monday through Friday). During peak periods or special circumstances, this timeframe may be slightly extended.
Transit Estimate: Once shipped, delivery takes between 5 to 8 business days (Monday through Friday), depending on location and carrier operations.
Shipping Cost: Free shipping to the Continental U.S. (48 states). Machines that ship by freight carrier travel free to a commercial address with a loading dock or forklift, or to the carrier's terminal; liftgate service is a flat $95 per order, chosen above when you add the machine to the cart.

Free Shipping

Lower 48. Liftgate service available on freight machines.

30-Days Returns

SSL Encrypted Payments

Frequently Asked Questions (FAQs)

Welcome to High Pressure Car Washer! We're here to assist you in your journey to find the best pressure washer products. Please explore the sections below to find answers to common questions you might have.

Swipe to see more

What happens after I place an order?

An order confirmation email is sent as soon as the order is placed. Orders placed before 4:00 PM CST on a business day are handled the same day, and orders placed after that time are handled the next business day. Preparation takes 0 to 1 business days, Monday through Friday. When the order leaves, a shipping confirmation email with tracking details follows.

Missing Tracking Email?

Tracking details are emailed automatically when an order ships, and orders are prepared within 0 to 1 business days, so tracking normally arrives within 3 business days of ordering. If it has not, the spam folder is the first place to check. After that, a message to support@highpressurecarwasher.com with the order number, or a note through the Contact page, lets us confirm the email address on file and check the shipment.

Shipping Time Guarantees

Delivery times are estimates rather than guarantees. Transit normally takes 5 to 8 business days after an order ships, but the destination and carrier schedules can extend that. When a delivery runs past the estimate, an additional 2 to 3 business days is the normal allowance. If the package still has not arrived after that, contacting us with the order number starts a trace with the carrier.

What is your return policy?

Returns are accepted within 30 days of the delivery date. Items must be unused, in their original condition and in their original packaging. A return starts with an email to support@highpressurecarwasher.com that includes the order number and the reason for the return; the return address and instructions are sent back from there. Return shipping is paid by the customer, and approved returns carry a 20 percent restocking fee, which is waived for items that arrived damaged, defective or incorrect. Once the returned item has been received and approved, the refund is issued to the original payment method within 9 days.

Damaged or Defective Items

Damaged and defective items are replaced or corrected. The process starts with an email to support@highpressurecarwasher.com that includes the order number and clear photos of the item and its packaging. Each case is reviewed promptly, and a replacement or correction is arranged from there. No restocking fee applies to items that arrived damaged, defective or incorrect.

Where to Find the Full Return Policy?

The complete Return and Refund Policy and the Shipping Policy are linked in the footer of every page and in the Help menu. The same return terms also appear on every product page under Return Details.

Is there a shipping fee?

Shipping is free to the 48 continental states. Accessories and portable machines ship by ground at no charge. Machines that ship by freight carrier travel free to a commercial address with a loading dock or forklift, or to the carrier's terminal for pickup. Liftgate service, which lowers the crate to the ground at your address, is a flat $95 per order, chosen when you add the machine to the cart. Orders for Alaska, Hawaii or addresses outside the 48 states are handled case by case, so customers in those areas are asked to contact us before ordering.

Can I track my order?

Every order is trackable. When an order ships, a shipping confirmation email goes out with the tracking details, and the package can be followed from that link until delivery. If no tracking email has arrived within 3 business days of ordering, a message to support@highpressurecarwasher.com with the order number lets us check the shipment.

How will my product be shipped?

The shipping method depends on the size of the item. Accessories and smaller units travel with a parcel carrier at no charge. Large machines are strapped to a pallet and shipped by LTL freight: free to a commercial address with a dock or forklift, or to the carrier's terminal for pickup, with liftgate service available for a flat $95 per order. Freight deliveries should be received in person so the shipment can be inspected on arrival, and any visible damage should be written on the delivery receipt before it is signed.

What should I consider before making a purchase?

The specifications on each product page are the starting point: PSI and GPM determine cleaning power, the power source and, for electric units, the voltage and phase determine where the machine can run, and the water temperature determines what it can clean. Matching those specifications to the intended work matters, because High Pressure Car Washer cannot be responsible for a machine used for a purpose it was not specified for. Help choosing the right unit is available before ordering by email or phone.

Additional Considerations

Two details deserve a look before ordering. The full specifications on the product page confirm the machine's capabilities, and the Emission Compliance Notice shows whether an engine-driven unit can be sold or shipped to California, since some cannot. Questions can be sent to support@highpressurecarwasher.com or asked by phone at (219) 327-1138, Monday through Friday, 9:00 am to 6:00 pm CST.

What should I expect after placing an order?

An order confirmation email arrives right after checkout. The payment method is charged at checkout, and the order enters processing, where it is prepared for shipment. Changes and cancellations are possible only before processing begins; once an order is in processing or has shipped, the return process applies after delivery.

Shipping Timeframes

Orders are prepared within 0 to 1 business days, Monday through Friday. After dispatch, delivery takes 5 to 8 business days depending on the destination and the carrier. Tracking details are emailed when the order ships.

Inspecting Your Delivery

Packaging should be inspected when a delivery arrives. If damage is visible, photographs of the packaging taken before it is opened and sent to support@highpressurecarwasher.com with the order number allow the claim to be handled quickly. For freight deliveries, any damage should also be noted on the driver's delivery receipt before it is signed.

Missing Parts or Damaged Deliveries

The contents of every delivery should be checked on arrival. If an item is damaged or a part is missing, an email to support@highpressurecarwasher.com with photos and the order number is all that is needed; a replacement or correction is arranged from there.

Tracking Information

Tracking numbers are sent by email when orders ship. If none has arrived within 3 business days of placing an order, contacting us allows the email address on file to be confirmed and the shipment to be checked.

Are you an authorized dealer for your products?

Yes, we are proud to be authorized dealers for the brands we support.

What is your privacy policy?

The Privacy Policy describes what information High Pressure Car Washer collects, how that information is used and how it is protected. It is linked in the footer of every page and in the Help menu, and questions about it can be sent to support@highpressurecarwasher.com.