Cam Spray 208STATLEF Pressure Washer Electric Powered Stationary LP Gas Fired Hot Water 8 GPM 2,000 PSI
Cam Spray 208STATLEF Hot Water Pressure Washer
The Cam Spray 208STATLEF delivers 2,000 PSI at 8 GPM from a 10 HP electric motor with heat from a LP gas burner, built for a fixed installation. It runs on 230 volt, 40 amp, single phase power.
Motor, Pump and Protection
The STAT series adds a water tank to the stationary ST platform for installations where the supply cannot feed the pump directly. A totally enclosed, thermal overload protected industrial motor drives a triplex plunger pump with ceramic plungers and stainless steel valves, protected by an unloader valve and a secondary pressure pop off. The LP gas burner uses forced air technology with a Schedule 80 coil wrapped in stainless steel, controlled by an adjustable thermostat and a temperature limit switch for a maximum of 195 degrees Fahrenheit.
Installation and Included Equipment
The skid frame is industrial coated steel tubing. Low pressure chemical injection feeds concentrated detergent through the dual wand with side handle valve, and quick change 0, 15, 25 and 40 degree nozzles are included. Fuel burning units must be operated outdoors or properly vented with make up air. Ships with a 50 ft x 3/8 in high pressure hose, a 10 ft power cord and a 50 gallon water tank. Product dimensions 57 in x 29 in x 56 in. Maximum pump inlet water temperature 140 degrees F.
Specifications
- Pressure: 2,000 PSI (138 bar)
- Flow: 8 GPM (30.4 LPM)
- Power: Electric Motor, 10 HP
- Voltage / amperage / phase: 230 Volt / 40 Amp / 1
- Water: hot, L.P. Gas
- Mounting: stationary
- Hose: 50 ft x 3/8 in
- Power cord: 10 ft
- Water tank: 50 gallons
- Burner stack: 10 in
- Ship weight: 660 lb
- Model: 208STATLEF
- Return Eligibility: Within 30 days of delivery
- Restocking Charges: 20% Restocking Fee
- Refund Processing Time: Up to 9 days after approval
- Return Shipping: Covered by the customer
Quick Overview:
- Daily Cut-Off: Orders placed before 4:00 PM (CST) are handled the same business day. Orders submitted after this time will be queued for the next business day.
- Preparation Time: Orders are prepared within 0–1 business days (Monday–Friday). During peak periods or special circumstances, this timeframe may be slightly extended.
- Transit Estimate: Once shipped, delivery takes between 5–8 business days (Monday–Friday), depending on location and carrier operations.
- Shipping Cost: We offer complimentary shipping on all orders within the United States.