Pressure-Pro T185SKH/SK40005VH hot water pressure washer trailer with a 200 gallon tank and two stainless steel hose reels

Pressure-Pro Dirt Laser T185SKH/SK40005VH 4,000 PSI 4.8 GPM Gas Powered Hot Water Pressure Washer with Vanguard 570cc Engine, 200 Gallon Trailer

$11,950.65 - $11,950.65

$11,950.65

$11,950.65 - $11,950.65

$11,950.65

In stock, ready to ship

Is this the right machine for my job?

Answer a few quick questions and see whether the Pressure-Pro T185SKH/SK40005VH fits your job, your site and your water supply, or which machines fit better.

Takes under a minute. No email needed to see results.

Contractors who want high pressure and high flow on the same trailer buy the Pressure-Pro Dirt Laser T185SKH/SK40005VH. A 570 cc Vanguard with electric start turns a belt driven AR triplex pump to 4,000 PSI at 4.8 GPM, and the 12 volt diesel burner heats the water to 250 degrees Fahrenheit. The 200 gallon single axle trailer carries the tank, a stainless steel inlet reel and a stainless steel high pressure reel, so the machine reaches yards that have no water supply.

Pressure-Pro Dirt Laser T185SKH/SK40005VH 4,000 PSI 4.8 GPM Hot Water Pressure Washer on a 200 Gallon Single Axle Trailer

What the Pressure-Pro T185SKH/SK40005VH Is and Who It Is For

The Pressure-Pro Dirt Laser T185SKH/SK40005VH is a complete hot water wash package on a single axle trailer. A 200 gallon poly tank feeds the machine, so the crew works on sites that have no water supply of their own, and a stainless steel inlet reel and a stainless steel high pressure reel keep both hoses off the ground. Fleet washers, pressure washing contractors, municipalities, agricultural operations and equipment yards run this package. At 4,000 PSI and 4.8 GPM with water heated to 250 degrees Fahrenheit it takes off grease, hydraulic oil, road film and baked on grime that cold water only moves around.

Engine, Pump and Drive on the Pressure-Pro T185SKH/SK40005VH

The 570 cc Vanguard engine has electric start and powers both the pump and the 12 volt diesel burner, so the package needs no external electrical supply. It turns a belt driven AR triplex pump with ceramic plungers rated at 4,000 PSI and 4.8 GPM. The unloader is remote mounted for easy maintenance and runs an external bypass loop that keeps the pump cool when the gun is closed, and a pressure relief valve and a burst disc protect the operator.

Trailer Body and Washer Skid on the Pressure-Pro T185SKH/SK40005VH

The single axle trailer rides on a 3,700 pound rated torsion axle, carries heavy duty steel fenders and recessed lights, and parks on a flip up locking wheeled jack. The 200 gallon poly tank has an inlet water filter strainer that keeps debris out of the pump, and the two stainless steel hose reels carry a 50 foot high pressure hose and a 100 foot inlet hose.

The washer itself sits in a rugged powder coated steel full cage frame with a balanced lifting point, so the skid can be lifted out of the trailer and mounted somewhere else later. The skid measures 43 x 27 x 45 in.

Burner and Heat on the Pressure-Pro T185SKH/SK40005VH

A 12 volt diesel burner fires a high capacity 1/2 inch schedule 80 steel coil wrapped in stainless steel insulation. An adjustable thermostat sets the outlet anywhere up to 250 degrees Fahrenheit, so the same machine runs warm water for general washing or wet steam for heavy grease. The burner draws from the 8 gallon diesel tank.

Pressure-Pro T185SKH/SK40005VH Features

200 gallon poly water tank with an inlet water filter strainer
Stainless steel inlet reel and stainless steel high pressure reel
3,700 pound rated torsion axle for a smooth ride
Flip up locking wheeled jack
Heavy duty steel fenders and recessed lights
Commercial and industrial 570 cc Vanguard gasoline engine with electric start
Triplex ceramic plunger AR pump, belt driven
Adjustable thermostat up to 250 degrees Fahrenheit
High capacity 1/2 inch schedule 80 steel coil with a stainless steel insulated wrap
12 volt diesel burner, so no external electrical supply is needed
Remote mounted unloader with an external bypass loop that keeps the pump cool
Pressure relief valve and burst disc for operator safety
Rugged powder coated steel full cage frame with a balanced lifting point

Pressure-Pro T185SKH/SK40005VH Standard Accessories

50 foot high pressure hose
100 foot inlet hose
Gun and wand assembly
Quick connect spray nozzles

What Is Not Included with the Pressure-Pro T185SKH/SK40005VH

The skid needs a Group 24 550 CCA battery to start and that battery is not included. The downstream soap injection kit with the quick connect soap nozzle, part number AC340, and the hour meter, part number AM512, are options and are not part of this package. The 200 gallon tank ships empty and is filled from your own water supply.

Pressure-Pro T185SKH/SK40005VH Specifications

Model	T185SKH/SK40005VH
Series	Dirt Laser
Water Type	Hot Water
Power	Gas
Pressure	4,000 PSI
Flow Rate	4.8 GPM
Engine	Vanguard, 570 cc
Electric Start	Yes
Pump	AR triplex, ceramic plunger
Drive	Belt drive
Frame	Powder coated steel full cage skid on a single axle trailer
Burner	12 volt diesel, adjustable thermostat up to 250 F
Fuel Tanks	8 gallon gasoline tank and 8 gallon diesel tank
Water Tank	200 gallon poly with inlet water filter strainer
Hose Reels	Two stainless steel, 50 foot high pressure hose and 100 foot inlet hose
Dimensions (skid, L x W x H)	43 x 27 x 45 in
California Sales	No manufacturer restriction listed

Notes on the Pressure-Pro T185SKH/SK40005VH

The photo shows the same trailer carrying an SK30005VH skid. This package ships with the SK40005VH skid, which shares the frame, the coil and the accessories and differs in engine, drive, pressure and flow.

Pressure-Pro publishes no overall length, width, height or weight for the trailer package. The dimensions listed are for the washer skid alone.

Return Details

Return Eligibility: Within 30 days of delivery
Restocking Charges: 20% Restocking Fee
Refund Processing Time: Up to 9 days after approval
Return Shipping: Covered by the customer

Shipping Details

Quick Overview:

Daily Cut-Off: Orders placed before 4:00 PM (CST) are handled the same business day. Orders submitted after this time will be queued for the next business day.
Preparation Time: Orders are prepared within 0 to 1 business days (Monday through Friday). During peak periods or special circumstances, this timeframe may be slightly extended.
Transit Estimate: Once shipped, delivery takes between 5 to 8 business days (Monday through Friday), depending on location and carrier operations.
Shipping Cost: We offer complimentary shipping on all orders in the Continental U.S. (48 states).

Free Shipping

30-Days Returns

SSL Encrypted Payments

Frequently Asked Questions (FAQs)

Welcome to High Pressure Car Washer! We're here to assist you in your journey to find the best pressure washer products. Please explore the sections below to find answers to common questions you might have.

Swipe to see more

What happens after I place an order?

An order confirmation email is sent as soon as the order is placed. Orders placed before 4:00 PM CST on a business day are handled the same day, and orders placed after that time are handled the next business day. Preparation takes 0 to 1 business days, Monday through Friday. When the order leaves, a shipping confirmation email with tracking details follows.

Missing Tracking Email?

Tracking details are emailed automatically when an order ships, and orders are prepared within 0 to 1 business days, so tracking normally arrives within 3 business days of ordering. If it has not, the spam folder is the first place to check. After that, a message to support@highpressurecarwasher.com with the order number, or a note through the Contact page, lets us confirm the email address on file and check the shipment.

Shipping Time Guarantees

Delivery times are estimates rather than guarantees. Transit normally takes 5 to 8 business days after an order ships, but the destination and carrier schedules can extend that. When a delivery runs past the estimate, an additional 2 to 3 business days is the normal allowance. If the package still has not arrived after that, contacting us with the order number starts a trace with the carrier.

What is your return policy?

Returns are accepted within 30 days of the delivery date. Items must be unused, in their original condition and in their original packaging. A return starts with an email to support@highpressurecarwasher.com that includes the order number and the reason for the return; the return address and instructions are sent back from there. Return shipping is paid by the customer, and approved returns carry a 20 percent restocking fee, which is waived for items that arrived damaged, defective or incorrect. Once the returned item has been received and approved, the refund is issued to the original payment method within 9 days.

Damaged or Defective Items

Damaged and defective items are replaced or corrected. The process starts with an email to support@highpressurecarwasher.com that includes the order number and clear photos of the item and its packaging. Each case is reviewed promptly, and a replacement or correction is arranged from there. No restocking fee applies to items that arrived damaged, defective or incorrect.

Where to Find the Full Return Policy?

The complete Return and Refund Policy and the Shipping Policy are linked in the footer of every page and in the Help menu. The same return terms also appear on every product page under Return Details.

Is there a shipping fee?

There is no shipping fee. Every order shipping to the Continental U.S. (48 states) ships free, with no minimum purchase and no surcharges of any kind. Orders for Alaska, Hawaii or addresses outside the 48 states are handled case by case, so customers in those areas are asked to contact us before ordering.

Can I track my order?

Every order is trackable. When an order ships, a shipping confirmation email goes out with the tracking details, and the package can be followed from that link until delivery. If no tracking email has arrived within 3 business days of ordering, a message to support@highpressurecarwasher.com with the order number lets us check the shipment.

How will my product be shipped?

The shipping method depends on the size of the item. Accessories and smaller units travel with a parcel carrier. Large machines are strapped to a pallet and shipped by LTL freight, with curbside delivery. Shipping is free in both cases. Freight deliveries should be received in person so the shipment can be inspected on arrival, and any visible damage should be written on the delivery receipt before it is signed.

What should I consider before making a purchase?

The specifications on each product page are the starting point: PSI and GPM determine cleaning power, the power source and, for electric units, the voltage and phase determine where the machine can run, and the water temperature determines what it can clean. Matching those specifications to the intended work matters, because High Pressure Car Washer cannot be responsible for a machine used for a purpose it was not specified for. Help choosing the right unit is available before ordering by email or phone.

Additional Considerations

Two details deserve a look before ordering. The full specifications on the product page confirm the machine's capabilities, and the Emission Compliance Notice shows whether an engine-driven unit can be sold or shipped to California, since some cannot. Questions can be sent to support@highpressurecarwasher.com or asked by phone at (219) 327-1138, Monday through Friday, 9:00 am to 6:00 pm CST.

What should I expect after placing an order?

An order confirmation email arrives right after checkout. The payment method is charged at checkout, and the order enters processing, where it is prepared for shipment. Changes and cancellations are possible only before processing begins; once an order is in processing or has shipped, the return process applies after delivery.

Shipping Timeframes

Orders are prepared within 0 to 1 business days, Monday through Friday. After dispatch, delivery takes 5 to 8 business days depending on the destination and the carrier. Tracking details are emailed when the order ships.

Inspecting Your Delivery

Packaging should be inspected when a delivery arrives. If damage is visible, photographs of the packaging taken before it is opened and sent to support@highpressurecarwasher.com with the order number allow the claim to be handled quickly. For freight deliveries, any damage should also be noted on the driver's delivery receipt before it is signed.

Missing Parts or Damaged Deliveries

The contents of every delivery should be checked on arrival. If an item is damaged or a part is missing, an email to support@highpressurecarwasher.com with photos and the order number is all that is needed; a replacement or correction is arranged from there.

Tracking Information

Tracking numbers are sent by email when orders ship. If none has arrived within 3 business days of placing an order, contacting us allows the email address on file to be confirmed and the shipment to be checked.

Are you an authorized dealer for your products?

Yes, we are proud to be authorized dealers for the brands we support.

What is your privacy policy?

The Privacy Policy describes what information High Pressure Car Washer collects, how that information is used and how it is protected. It is linked in the footer of every page and in the Help menu, and questions about it can be sent to support@highpressurecarwasher.com.