Pressure-Pro Hot Link CPHL5E1 diesel fired hot water generator, bare unit without the optional wheel kit

Pressure-Pro Hot Link CPHL5E1 Hot Water Generator for Cold Water Pressure Washers, 115 Volt

$2,069.55 - $2,069.55

$2,069.55

$2,069.55 - $2,069.55

$2,069.55

In stock, ready to ship

The Pressure-Pro Hot Link CPHL5E1 turns a cold water pressure washer into a hot water pressure washer for grease, gum and graffiti. Your washer feeds the Hot Link, the diesel burner heats the water on the way through, and your gun and hose connect to the outlet. This model runs on 115 volt power from a standard 15 amp outlet or a 2,000 watt generator, which suits shops, wash bays and trailers that carry a generator.

Pressure-Pro Hot Link CPHL5E1 115 Volt Diesel Fired Hot Water Generator for Cold Water Pressure Washers

What the Pressure-Pro Hot Link CPHL5E1 Is and Who It Is For

The Pressure-Pro Hot Link CPHL5E1 is a hot water generator that attaches to a cold water pressure washer you already own. High pressure water leaves your washer, passes through the Hot Link where a diesel burner heats it, and comes out the outlet for your gun and hose. Shops, mobile detailers, fleet crews and contractors buy it when hot water is needed for grease, gum or graffiti but a second complete machine is not worth the money or the space.

How the Pressure-Pro Hot Link CPHL5E1 Connects and Controls the Burner

The Hot Link works with almost any cold water pressure washer up to 4,350 PSI and up to 5 GPM. Connect it with the included jumper hose, then move your pressure hose, gun, wand and nozzles to the outlet on the Hot Link. Control is by flow switch. Pull the trigger and the burner lights, release it and the burner shuts down. A lighted on and off switch and an adjustable thermostat sit on the panel, and this model runs on 115 volt single phase at 2 amps from a standard 15 amp outlet or a 2,000 watt generator.

Frame and Mounting on the Pressure-Pro Hot Link CPHL5E1

The base frame is powder coated steel with four holes so the unit bolts down to a truck or a trailer. The coil is wrapped in stainless steel with double wall coil end caps. The whole unit measures 29 x 22 x 22 in and weighs 180 lb, so it stores on a shelf or in a corner of the trailer when the job does not call for hot water.

Burner and Heat on the Pressure-Pro Hot Link CPHL5E1

The burner runs on number 2 diesel from a 3 gallon tank and fires a 1/2 inch schedule 80 steel pipe coil, cold rolled in 4 spirals with ceramic insulation. Rated input is 325,000 Btu, which heats 4.75 GPM at a 100 degree Fahrenheit rise, and the adjustable thermostat reaches 200 degrees Fahrenheit. Safety features are redundant: a flow switch, a pressure relief valve and a burst disc.

Pressure-Pro Hot Link CPHL5E1 Features

Adds hot water to the cold water pressure washer you already own
Connects to almost any cold water pressure washer up to 4,350 PSI and up to 5 GPM
Adjustable temperature up to 200 degrees Fahrenheit for grease, gum and graffiti
Flow controlled burner that starts when the gun is pulled and stops when it is released
325,000 Btu rated input, 4.75 GPM at a 100 degree Fahrenheit rise
Runs on 115 volt single phase power, 2 amps, from a 15 amp outlet or a 2,000 watt generator
1/2 inch schedule 80 steel pipe coil, cold rolled 4 spiral, with ceramic insulation
Rugged powder coated base frame, stainless steel coil wrap and double wall coil end caps
Lighted on and off switch with an adjustable thermostat
3 gallon diesel fuel tank for the burner
Flow switch, pressure relief valve and burst disc for operator safety
Four holes to bolt the unit down to your truck or trailer
Compact at 29 x 22 x 22 in, so it stores easily when it is not in use

Pressure-Pro Hot Link CPHL5E1 Standard Accessories

48 inch jumper hose rated 5,000 PSI and 250 degrees Fahrenheit, to connect the Hot Link to your existing pressure washer
GFCI power cord with plug

What Is Not Included with the Pressure-Pro Hot Link CPHL5E1

A gun and a hose are not included. You use the gun, wand, hose and nozzles from your own pressure washer, and they must be rated for at least 200 degrees Fahrenheit before you run them on hot water. The AHC25 four wheel kit with a handle is an option and is not included. Diesel fuel for the burner is not included.

Pressure-Pro Hot Link CPHL5E1 Specifications

Model	CPHL5E1
Series	Hot Link
Water Type	Hot Water
Power	115 volt, 1 phase, 2 amp, 15 amp outlet or 2,000 watt generator
Pressure	Connects to a cold water pressure washer up to 4,350 PSI
Flow Rate	Up to 5 GPM, 4.75 GPM at a 100 degree Fahrenheit rise
Frame	Powder coated steel base frame with four bolt down holes
Burner	Diesel fired, adjustable thermostat up to 200 F
Heat Output	325,000 Btu input
Coil	1/2 inch schedule 80 steel pipe, cold rolled 4 spiral, ceramic insulation
Fuel Tanks	3 gallon diesel
Dimensions (L x W x H)	29 x 22 x 22 in
Weight	180 lb
California Sales	No manufacturer restriction listed

Notes on the Pressure-Pro Hot Link CPHL5E1

The photo is the catalog page 47 image of the Hot Link without the optional AHC25 four wheel kit.

Pressure-Pro publishes no photo of the 115 volt model. The unit shown is the 12 volt CPHL5DC, which shares the frame, the coil and the cabinet.

Return Details

Return Eligibility: Within 30 days of delivery
Restocking Charges: 20% Restocking Fee
Refund Processing Time: Up to 9 days after approval
Return Shipping: Covered by the customer

Shipping Details

Quick Overview:

Daily Cut-Off: Orders placed before 4:00 PM (CST) are handled the same business day. Orders submitted after this time will be queued for the next business day.
Preparation Time: Orders are prepared within 0 to 1 business days (Monday through Friday). During peak periods or special circumstances, this timeframe may be slightly extended.
Transit Estimate: Once shipped, delivery takes between 5 to 8 business days (Monday through Friday), depending on location and carrier operations.
Shipping Cost: We offer complimentary shipping on all orders in the Continental U.S. (48 states).

Free Shipping

30-Days Returns

SSL Encrypted Payments

Frequently Asked Questions (FAQs)

Welcome to High Pressure Car Washer! We're here to assist you in your journey to find the best pressure washer products. Please explore the sections below to find answers to common questions you might have.

Swipe to see more

What happens after I place an order?

An order confirmation email is sent as soon as the order is placed. Orders placed before 4:00 PM CST on a business day are handled the same day, and orders placed after that time are handled the next business day. Preparation takes 0 to 1 business days, Monday through Friday. When the order leaves, a shipping confirmation email with tracking details follows.

Missing Tracking Email?

Tracking details are emailed automatically when an order ships, and orders are prepared within 0 to 1 business days, so tracking normally arrives within 3 business days of ordering. If it has not, the spam folder is the first place to check. After that, a message to support@highpressurecarwasher.com with the order number, or a note through the Contact page, lets us confirm the email address on file and check the shipment.

Shipping Time Guarantees

Delivery times are estimates rather than guarantees. Transit normally takes 5 to 8 business days after an order ships, but the destination and carrier schedules can extend that. When a delivery runs past the estimate, an additional 2 to 3 business days is the normal allowance. If the package still has not arrived after that, contacting us with the order number starts a trace with the carrier.

What is your return policy?

Returns are accepted within 30 days of the delivery date. Items must be unused, in their original condition and in their original packaging. A return starts with an email to support@highpressurecarwasher.com that includes the order number and the reason for the return; the return address and instructions are sent back from there. Return shipping is paid by the customer, and approved returns carry a 20 percent restocking fee, which is waived for items that arrived damaged, defective or incorrect. Once the returned item has been received and approved, the refund is issued to the original payment method within 9 days.

Damaged or Defective Items

Damaged and defective items are replaced or corrected. The process starts with an email to support@highpressurecarwasher.com that includes the order number and clear photos of the item and its packaging. Each case is reviewed promptly, and a replacement or correction is arranged from there. No restocking fee applies to items that arrived damaged, defective or incorrect.

Where to Find the Full Return Policy?

The complete Return and Refund Policy and the Shipping Policy are linked in the footer of every page and in the Help menu. The same return terms also appear on every product page under Return Details.

Is there a shipping fee?

There is no shipping fee. Every order shipping to the Continental U.S. (48 states) ships free, with no minimum purchase and no surcharges of any kind. Orders for Alaska, Hawaii or addresses outside the 48 states are handled case by case, so customers in those areas are asked to contact us before ordering.

Can I track my order?

Every order is trackable. When an order ships, a shipping confirmation email goes out with the tracking details, and the package can be followed from that link until delivery. If no tracking email has arrived within 3 business days of ordering, a message to support@highpressurecarwasher.com with the order number lets us check the shipment.

How will my product be shipped?

The shipping method depends on the size of the item. Accessories and smaller units travel with a parcel carrier. Large machines are strapped to a pallet and shipped by LTL freight, with curbside delivery. Shipping is free in both cases. Freight deliveries should be received in person so the shipment can be inspected on arrival, and any visible damage should be written on the delivery receipt before it is signed.

What should I consider before making a purchase?

The specifications on each product page are the starting point: PSI and GPM determine cleaning power, the power source and, for electric units, the voltage and phase determine where the machine can run, and the water temperature determines what it can clean. Matching those specifications to the intended work matters, because High Pressure Car Washer cannot be responsible for a machine used for a purpose it was not specified for. Help choosing the right unit is available before ordering by email or phone.

Additional Considerations

Two details deserve a look before ordering. The full specifications on the product page confirm the machine's capabilities, and the Emission Compliance Notice shows whether an engine-driven unit can be sold or shipped to California, since some cannot. Questions can be sent to support@highpressurecarwasher.com or asked by phone at (219) 327-1138, Monday through Friday, 9:00 am to 6:00 pm CST.

What should I expect after placing an order?

An order confirmation email arrives right after checkout. The payment method is charged at checkout, and the order enters processing, where it is prepared for shipment. Changes and cancellations are possible only before processing begins; once an order is in processing or has shipped, the return process applies after delivery.

Shipping Timeframes

Orders are prepared within 0 to 1 business days, Monday through Friday. After dispatch, delivery takes 5 to 8 business days depending on the destination and the carrier. Tracking details are emailed when the order ships.

Inspecting Your Delivery

Packaging should be inspected when a delivery arrives. If damage is visible, photographs of the packaging taken before it is opened and sent to support@highpressurecarwasher.com with the order number allow the claim to be handled quickly. For freight deliveries, any damage should also be noted on the driver's delivery receipt before it is signed.

Missing Parts or Damaged Deliveries

The contents of every delivery should be checked on arrival. If an item is damaged or a part is missing, an email to support@highpressurecarwasher.com with photos and the order number is all that is needed; a replacement or correction is arranged from there.

Tracking Information

Tracking numbers are sent by email when orders ship. If none has arrived within 3 business days of placing an order, contacting us allows the email address on file to be confirmed and the shipment to be checked.

Are you an authorized dealer for your products?

Yes, we are proud to be authorized dealers for the brands we support.

What is your privacy policy?

The Privacy Policy describes what information High Pressure Car Washer collects, how that information is used and how it is protected. It is linked in the footer of every page and in the Help menu, and questions about it can be sent to support@highpressurecarwasher.com.