Skip to content
Pressure-Pro Dirt Laser SK40005VH hot water gas pressure washer skid, front view

Pressure-Pro Dirt Laser SK40005VH Hot Water Gas Pressure Washer 4,000 PSI 570cc Vanguard Skid

$7,164.00 - $7,164.00
$7,164.00
$7,164.00 - $7,164.00
$7,164.00
In stock, ready to ship

This machine ships free by freight carrier to a commercial address with a loading dock or forklift, or to the carrier's terminal for pickup. Liftgate service brings the crate to your address and lowers it to the ground at the curb, one flat fee per order. Crated weight about 1000 lb. Delivery takes 5 to 8 business days. Questions? Call (219) 327-1138.

Is this the right machine for my job?

Answer a few quick questions and see whether the Pressure-Pro Dirt Laser SK40005VH fits your job, your site and your water supply, or which machines fit better.

Takes under a minute. No email needed to see results.

The Pressure-Pro Dirt Laser SK40005VH is the hot water skid built to bolt into a truck bed or a trailer and go to the job: a 570cc Vanguard engine with electric start turns a belt drive AR triplex pump to 4,000 PSI at 4.8 GPM, and a 12 volt diesel burner heats the water to 250 degrees Fahrenheit for the grease, hydraulic oil and road film that cold water leaves behind. Fleet washers, mobile detailers and contractors who wash heavy equipment on site are the buyers.

Pressure-Pro Dirt Laser SK40005VH 4,000 PSI 4.8 GPM Hot Water Gas Pressure Washer Skid with 570cc Vanguard Electric Start and Belt Drive AR Triplex Pump

The Pressure-Pro Dirt Laser SK40005VH pairs 4,000 PSI with 4.8 GPM and heated water up to 250 degrees Fahrenheit on a skid-mount frame. The 570cc Vanguard engine with electric start powers an AR triplex pump through a low-RPM belt drive, a setup that reduces pump wear and extends service life compared to direct-drive configurations. This is the Dirt Laser you bolt into a work truck when the job calls for both high pressure and high flow with hot water on concrete, industrial equipment, and oil field components.

Skid-Mount Frame for Truck and Trailer Installation on the Pressure-Pro SK40005VH

The powder-coated steel skid frame mounts directly to a truck bed, flatbed, or trailer without wheels or axles getting in the way. Bolt it down once and the SK40005VH stays secured through daily driving and rough terrain. The unit ships with a 50-foot 3/8-inch rubber hose, spray gun with safety lock, 36-inch insulated wand, and five quick-connect nozzle tips.

Pressure-Pro SK40005VH Features

  • 4,000 PSI / 4.8 GPM, Low RPM belt-drive triplex pump
  • Electric start 570 cc Vanguard engine
  • Large 8-Gallon Fuel Tank for Extended Run Time
  • Includes 50 ft Hose, Gun, Wand and Spray Tips
  • Requires G24 550CCA Battery
  • Adj Thermostat, up to 250F Wet Steam
  • Gas Engine / Diesel Fired

Pressure-Pro SK40005VH Specifications

Engine Manufacturer Vanguard
Water Flow (GPM) 4.8
Hose Diameter 3/8 in
Hose Length 50 ft
Hose Material rubber
HP/CC 570cc
Max Temperature 250F
Water Pressure (PSI) 4000
Pump Brand AR
Pump Type Triplex
Pressure Washer Frame Type Skid Mount
Frame Material Powder Coated Steel
Spray Gun Connection threaded
Starting System Electric Start
Max PSI 4,000 PSI
Flow Rate 4.8 GPM
Engine Vanguard
Fuel Type Gasoline
Water Type Hot Water

What Ships With the Pressure-Pro SK40005VH

  • Spray gun with safety lock
  • 36 in insulated wand
  • 50 ft high-pressure hose
  • Quick-connect nozzle tips (0 degrees, 15 degrees, 25 degrees, 40 degrees, soap)

Pressure-Pro SK40005VH Manual and Documents

  • Return Eligibility: Within 30 days of delivery
  • Restocking Charges: 20% Restocking Fee
  • Refund Processing Time: Up to 9 days after approval
  • Return Shipping: Covered by the customer

Quick Overview:

  • Daily Cut-Off: Orders placed before 4:00 PM (CST) are handled the same business day. Orders submitted after this time will be queued for the next business day.
  • Preparation Time: Orders are prepared within 0 to 1 business days (Monday through Friday). During peak periods or special circumstances, this timeframe may be slightly extended.
  • Transit Estimate: Once shipped, delivery takes between 5 to 8 business days (Monday through Friday), depending on location and carrier operations.
  • Shipping Cost: Free shipping to the Continental U.S. (48 states). Machines that ship by freight carrier travel free to a commercial address with a loading dock or forklift, or to the carrier's terminal; liftgate service is a flat $95 per order, chosen above when you add the machine to the cart.
Free Shipping

Lower 48. Liftgate service available on freight machines.

30-Days Returns
SSL Encrypted Payments
Frequently Asked Questions (FAQs)

Welcome to High Pressure Car Washer! We're here to assist you in your journey to find the best pressure washer products. Please explore the sections below to find answers to common questions you might have.

Swipe to see more
What happens after I place an order?
An order confirmation email is sent as soon as the order is placed. Orders placed before 4:00 PM CST on a business day are handled the same day, and orders placed after that time are handled the next business day. Preparation takes 0 to 1 business days, Monday through Friday. When the order leaves, a shipping confirmation email with tracking details follows.
Missing Tracking Email?
Tracking details are emailed automatically when an order ships, and orders are prepared within 0 to 1 business days, so tracking normally arrives within 3 business days of ordering. If it has not, the spam folder is the first place to check. After that, a message to support@highpressurecarwasher.com with the order number, or a note through the Contact page, lets us confirm the email address on file and check the shipment.
Shipping Time Guarantees
Delivery times are estimates rather than guarantees. Transit normally takes 5 to 8 business days after an order ships, but the destination and carrier schedules can extend that. When a delivery runs past the estimate, an additional 2 to 3 business days is the normal allowance. If the package still has not arrived after that, contacting us with the order number starts a trace with the carrier.
What is your return policy?
Returns are accepted within 30 days of the delivery date. Items must be unused, in their original condition and in their original packaging. A return starts with an email to support@highpressurecarwasher.com that includes the order number and the reason for the return; the return address and instructions are sent back from there. Return shipping is paid by the customer, and approved returns carry a 20 percent restocking fee, which is waived for items that arrived damaged, defective or incorrect. Once the returned item has been received and approved, the refund is issued to the original payment method within 9 days.
Damaged or Defective Items
Damaged and defective items are replaced or corrected. The process starts with an email to support@highpressurecarwasher.com that includes the order number and clear photos of the item and its packaging. Each case is reviewed promptly, and a replacement or correction is arranged from there. No restocking fee applies to items that arrived damaged, defective or incorrect.
Where to Find the Full Return Policy?
The complete Return and Refund Policy and the Shipping Policy are linked in the footer of every page and in the Help menu. The same return terms also appear on every product page under Return Details.
Is there a shipping fee?
Shipping is free to the 48 continental states. Accessories and portable machines ship by ground at no charge. Machines that ship by freight carrier travel free to a commercial address with a loading dock or forklift, or to the carrier's terminal for pickup. Liftgate service, which lowers the crate to the ground at your address, is a flat $95 per order, chosen when you add the machine to the cart. Orders for Alaska, Hawaii or addresses outside the 48 states are handled case by case, so customers in those areas are asked to contact us before ordering.
Can I track my order?
Every order is trackable. When an order ships, a shipping confirmation email goes out with the tracking details, and the package can be followed from that link until delivery. If no tracking email has arrived within 3 business days of ordering, a message to support@highpressurecarwasher.com with the order number lets us check the shipment.
How will my product be shipped?
The shipping method depends on the size of the item. Accessories and smaller units travel with a parcel carrier at no charge. Large machines are strapped to a pallet and shipped by LTL freight: free to a commercial address with a dock or forklift, or to the carrier's terminal for pickup, with liftgate service available for a flat $95 per order. Freight deliveries should be received in person so the shipment can be inspected on arrival, and any visible damage should be written on the delivery receipt before it is signed.
What should I consider before making a purchase?
The specifications on each product page are the starting point: PSI and GPM determine cleaning power, the power source and, for electric units, the voltage and phase determine where the machine can run, and the water temperature determines what it can clean. Matching those specifications to the intended work matters, because High Pressure Car Washer cannot be responsible for a machine used for a purpose it was not specified for. Help choosing the right unit is available before ordering by email or phone.
Additional Considerations
Two details deserve a look before ordering. The full specifications on the product page confirm the machine's capabilities, and the Emission Compliance Notice shows whether an engine-driven unit can be sold or shipped to California, since some cannot. Questions can be sent to support@highpressurecarwasher.com or asked by phone at (219) 327-1138, Monday through Friday, 9:00 am to 6:00 pm CST.
What should I expect after placing an order?
An order confirmation email arrives right after checkout. The payment method is charged at checkout, and the order enters processing, where it is prepared for shipment. Changes and cancellations are possible only before processing begins; once an order is in processing or has shipped, the return process applies after delivery.
Shipping Timeframes
Orders are prepared within 0 to 1 business days, Monday through Friday. After dispatch, delivery takes 5 to 8 business days depending on the destination and the carrier. Tracking details are emailed when the order ships.
Inspecting Your Delivery
Packaging should be inspected when a delivery arrives. If damage is visible, photographs of the packaging taken before it is opened and sent to support@highpressurecarwasher.com with the order number allow the claim to be handled quickly. For freight deliveries, any damage should also be noted on the driver's delivery receipt before it is signed.
Missing Parts or Damaged Deliveries
The contents of every delivery should be checked on arrival. If an item is damaged or a part is missing, an email to support@highpressurecarwasher.com with photos and the order number is all that is needed; a replacement or correction is arranged from there.
Tracking Information
Tracking numbers are sent by email when orders ship. If none has arrived within 3 business days of placing an order, contacting us allows the email address on file to be confirmed and the shipment to be checked.
Are you an authorized dealer for your products?
Yes, we are proud to be authorized dealers for the brands we support.
What is your privacy policy?
The Privacy Policy describes what information High Pressure Car Washer collects, how that information is used and how it is protected. It is linked in the footer of every page and in the Help menu, and questions about it can be sent to support@highpressurecarwasher.com.

Can't find what you're looking for? Our team is here to help.

Contact Support