Pressure-Pro S/B8035HAE099H(R)-BARE/VHRM6 gas powered cold water pressure washer skid mount

Pressure-Pro Pro-Max S/B8035HAE099H(R)-BARE/VHRM6 3,500 PSI 8.0 GPM Gas Powered Cold Water Pressure Washer with Honda GX690 Engine, Skid Mount, Bare

$5,400.00 - $5,400.00

$5,400.00

$5,400.00 - $5,400.00

$5,400.00

In stock, ready to ship

Is this the right machine for my job?

Answer a few quick questions and see whether the Pressure-Pro S/B8035HAE099H(R)-BARE/VHRM6 fits your job, your site and your water supply, or which machines fit better.

Takes under a minute. No email needed to see results.

Rig builders order the bare Pro-Max skid when the trailer already has a tank, a reel, a gun and a hose waiting for it. This one puts out 3,500 PSI at 8.0 GPM from a Honda GX690 with electric start and an AR XW3025N pump on a Gates polychain cogged belt, the drive that carries a 10,000 hour rating and a two year warranty. A genuine Honda muffler is fitted in place of the standard one.

Pressure-Pro Pro-Max S/B8035HAE099H(R)-BARE/VHRM6 3,500 PSI 8.0 GPM Gas Cold Water Skid Mount Pressure Washer with Honda GX690 Electric Start and AR XW3025N Pump

What the Pressure-Pro S/B8035HAE099H(R)-BARE/VHRM6 is built for

The Pressure-Pro S/B8035HAE099H(R)-BARE/VHRM6 runs at 3,500 PSI and 8.0 GPM for concrete, fleet washing, heavy equipment and large commercial properties. BARE is the Pressure-Pro code for a unit supplied without a fuel tank and without accessories, so this is a power plant for an equipment builder rather than a machine to unbox and use.

Engine, pump and drive on the Pressure-Pro S/B8035HAE099H(R)-BARE/VHRM6

A Honda GX690 twin, rated 22.1 net horsepower at 3,600 rpm, drives an AR XW3025N through a Gates polychain cogged belt. The XW3025N is rated to 7.92 GPM at 3,600 PSI, so the machine works below the pump ceiling. The polychain drive is rated 10,000 hours and carries a two year belt warranty, and no belt changes are called for in normal service. The VHRM6 suffix means a genuine Honda muffler.

Skid base and water supply on the Pressure-Pro S/B8035HAE099H(R)-BARE/VHRM6

This unit sits on a powder coated steel skid base with no wheels. The pump is set up for tank feed with an inlet nipple and a bypass hose, so it draws from a water supply tank or tote rather than a pressurized line. Units at 8 GPM and above carry no inlet filter.

Pressure-Pro S/B8035HAE099H(R)-BARE/VHRM6 Features

Powder coated steel skid base for truck bed, trailer or wall bracket mounting
Lifetime frame warranty
Gates polychain cogged belt rated 10,000 hours with a two year warranty
Genuine Honda muffler
Epoxy powder coated finish
EZ Start valve
Adjustable pressure unloader
Engine oil drain for easy maintenance
Dual spring cushioned shock absorbing feet
Low speed pump and thermo sensor that prevents overheating in bypass mode
Electric start with marine battery box
Set up for tank feed

What is not included with the Pressure-Pro S/B8035HAE099H(R)-BARE/VHRM6

This machine is sold bare. It ships without a fuel tank and without accessories, so a gun, a wand, a high pressure hose, a chemical injector, spray nozzles and a battery are not included and have to be ordered separately or carried over from your existing rig.

Pressure-Pro S/B8035HAE099H(R)-BARE/VHRM6 Specifications

Model	S/B8035HAE099H(R)-BARE/VHRM6
Series	Pro-Max
Water Type	Cold Water
Power	Gas
Pressure	3,500 PSI
Flow Rate	8.0 GPM
Engine	Honda GX690
Electric Start	Yes
Pump	AR XW3025N
Drive	Gates polychain cogged belt
Frame	Powder coated steel skid
Fuel Tank	Not included
Water Supply	Tank feed
California Sales	Not for sale or shipment to California

Notes on the Pressure-Pro S/B8035HAE099H(R)-BARE/VHRM6

Skid versions sit on a powder coated steel base and do not include wheels. The photo shows the wheeled cart version of this model.

Emission Compliance Notice

This Pressure-Pro product ships with a fuel tank that is not CARB evaporative compliant (49-state). This fuel system does not meet California Air Resources Board (CARB) emission standards. This model is not available for sale or shipment to California.

Return Details

Return Eligibility: Within 30 days of delivery
Restocking Charges: 20% Restocking Fee
Refund Processing Time: Up to 9 days after approval
Return Shipping: Covered by the customer

Shipping Details

Quick Overview:

Daily Cut-Off: Orders placed before 4:00 PM (CST) are handled the same business day. Orders submitted after this time will be queued for the next business day.
Preparation Time: Orders are prepared within 0 to 1 business days (Monday through Friday). During peak periods or special circumstances, this timeframe may be slightly extended.
Transit Estimate: Once shipped, delivery takes between 5 to 8 business days (Monday through Friday), depending on location and carrier operations.
Shipping Cost: We offer complimentary shipping on all orders in the Continental U.S. (48 states).

Free Shipping

30-Days Returns

SSL Encrypted Payments

Frequently Asked Questions (FAQs)

Welcome to High Pressure Car Washer! We're here to assist you in your journey to find the best pressure washer products. Please explore the sections below to find answers to common questions you might have.

Swipe to see more

What happens after I place an order?

An order confirmation email is sent as soon as the order is placed. Orders placed before 4:00 PM CST on a business day are handled the same day, and orders placed after that time are handled the next business day. Preparation takes 0 to 1 business days, Monday through Friday. When the order leaves, a shipping confirmation email with tracking details follows.

Missing Tracking Email?

Tracking details are emailed automatically when an order ships, and orders are prepared within 0 to 1 business days, so tracking normally arrives within 3 business days of ordering. If it has not, the spam folder is the first place to check. After that, a message to support@highpressurecarwasher.com with the order number, or a note through the Contact page, lets us confirm the email address on file and check the shipment.

Shipping Time Guarantees

Delivery times are estimates rather than guarantees. Transit normally takes 5 to 8 business days after an order ships, but the destination and carrier schedules can extend that. When a delivery runs past the estimate, an additional 2 to 3 business days is the normal allowance. If the package still has not arrived after that, contacting us with the order number starts a trace with the carrier.

What is your return policy?

Returns are accepted within 30 days of the delivery date. Items must be unused, in their original condition and in their original packaging. A return starts with an email to support@highpressurecarwasher.com that includes the order number and the reason for the return; the return address and instructions are sent back from there. Return shipping is paid by the customer, and approved returns carry a 20 percent restocking fee, which is waived for items that arrived damaged, defective or incorrect. Once the returned item has been received and approved, the refund is issued to the original payment method within 9 days.

Damaged or Defective Items

Damaged and defective items are replaced or corrected. The process starts with an email to support@highpressurecarwasher.com that includes the order number and clear photos of the item and its packaging. Each case is reviewed promptly, and a replacement or correction is arranged from there. No restocking fee applies to items that arrived damaged, defective or incorrect.

Where to Find the Full Return Policy?

The complete Return and Refund Policy and the Shipping Policy are linked in the footer of every page and in the Help menu. The same return terms also appear on every product page under Return Details.

Is there a shipping fee?

There is no shipping fee. Every order shipping to the Continental U.S. (48 states) ships free, with no minimum purchase and no surcharges of any kind. Orders for Alaska, Hawaii or addresses outside the 48 states are handled case by case, so customers in those areas are asked to contact us before ordering.

Can I track my order?

Every order is trackable. When an order ships, a shipping confirmation email goes out with the tracking details, and the package can be followed from that link until delivery. If no tracking email has arrived within 3 business days of ordering, a message to support@highpressurecarwasher.com with the order number lets us check the shipment.

How will my product be shipped?

The shipping method depends on the size of the item. Accessories and smaller units travel with a parcel carrier. Large machines are strapped to a pallet and shipped by LTL freight, with curbside delivery. Shipping is free in both cases. Freight deliveries should be received in person so the shipment can be inspected on arrival, and any visible damage should be written on the delivery receipt before it is signed.

What should I consider before making a purchase?

The specifications on each product page are the starting point: PSI and GPM determine cleaning power, the power source and, for electric units, the voltage and phase determine where the machine can run, and the water temperature determines what it can clean. Matching those specifications to the intended work matters, because High Pressure Car Washer cannot be responsible for a machine used for a purpose it was not specified for. Help choosing the right unit is available before ordering by email or phone.

Additional Considerations

Two details deserve a look before ordering. The full specifications on the product page confirm the machine's capabilities, and the Emission Compliance Notice shows whether an engine-driven unit can be sold or shipped to California, since some cannot. Questions can be sent to support@highpressurecarwasher.com or asked by phone at (219) 327-1138, Monday through Friday, 9:00 am to 6:00 pm CST.

What should I expect after placing an order?

An order confirmation email arrives right after checkout. The payment method is charged at checkout, and the order enters processing, where it is prepared for shipment. Changes and cancellations are possible only before processing begins; once an order is in processing or has shipped, the return process applies after delivery.

Shipping Timeframes

Orders are prepared within 0 to 1 business days, Monday through Friday. After dispatch, delivery takes 5 to 8 business days depending on the destination and the carrier. Tracking details are emailed when the order ships.

Inspecting Your Delivery

Packaging should be inspected when a delivery arrives. If damage is visible, photographs of the packaging taken before it is opened and sent to support@highpressurecarwasher.com with the order number allow the claim to be handled quickly. For freight deliveries, any damage should also be noted on the driver's delivery receipt before it is signed.

Missing Parts or Damaged Deliveries

The contents of every delivery should be checked on arrival. If an item is damaged or a part is missing, an email to support@highpressurecarwasher.com with photos and the order number is all that is needed; a replacement or correction is arranged from there.

Tracking Information

Tracking numbers are sent by email when orders ship. If none has arrived within 3 business days of placing an order, contacting us allows the email address on file to be confirmed and the shipment to be checked.

Are you an authorized dealer for your products?

Yes, we are proud to be authorized dealers for the brands we support.

What is your privacy policy?

The Privacy Policy describes what information High Pressure Car Washer collects, how that information is used and how it is protected. It is linked in the footer of every page and in the Help menu, and questions about it can be sent to support@highpressurecarwasher.com.