Products

The Cam Spray 4040STLEF is the 4,000 PSI stationary hot water unit heated by propane: a 10 HP motor on 230 volt single phase drives the pump to 4,0...

The Cam Spray 4040STNEF is the strongest of the ST series stationary units: 4,000 PSI at 4 GPM from a 10 HP electric motor on 230 volt 40 amp singl...

The Cam Spray 4040X is the 4,000 PSI electric cart: a 10 HP motor on 230 volt 40 amp single phase power drives the triplex pump to 4,000 PSI at 4 G...

The Cam Spray 4045DTE is the diesel engine trailer for a fleet that already runs on diesel: a 14 HP Hatz industrial diesel with electric start driv...

The Cam Spray 404HYD is the 4,000 PSI washer with no engine and no motor: it runs off the hydraulic system of the machine that carries it, so a pav...

The Cam Spray 4050BM is the 5 GPM cart mounted M model: a 480cc Briggs and Stratton engine drives the triplex pump to 4,000 PSI at 5 GPM, 20,000 cl...

The Cam Spray 4050BT is the Briggs and Stratton Vanguard version of the deluxe cold water trailer: 480cc of V twin engine drives the triplex pump t...

The Cam Spray 4055CBG is the Honda powered hot water skid for a contractor building a rig in a truck bed: a 22 HP 688cc Honda V twin drives the tri...

The Cam Spray 4055HT is the cold water trailer for a contractor who wants flow without a burner: a 700cc Honda drives the triplex pump to 4,000 PSI...

The Cam Spray 4055TM is the truck mount cold water unit with its own water: a 688cc Honda drives the triplex pump to 4,000 PSI at 5.5 GPM fed from ...

The Cam Spray 5000HXR is the fuel injected one: a 700cc Honda EFI engine starts without a choke and drives the triplex pump to 5,000 PSI at 4.5 GPM...

A garden hose cannot feed 5.5 GPM, so the Cam Spray 5055HRC carries its own 35 gallon tank with a float valve and pulls from that while the hose re...

The Cam Spray 5055HYD has no engine and no motor of its own: it turns the hydraulic flow of a paver, an excavator, a mining rig or a military vehic...

When 4,000 PSI will not lift the coating, the Cam Spray 7000HXR is the next step: 7,000 PSI at 4 GPM from a 688cc Honda engine, 28,000 cleaning uni...

The Cam Spray 7042HRC is the industrial pressure skid: 7,000 PSI at 4 GPM from a 688cc Honda is surface prep, coating removal and hydro blasting te...

The Cam Spray CBG5055HT is the complete mobile hot water rig for an industrial contractor: a 700cc Honda engine driving a triplex pump to 5,000 PSI...

The Cam Spray MCB3040D is the one fuel skid that moves: the MCB frame lifts from a truck to a van to a trailer with a wand and hose rack built in, ...

Honda reliability on a hot water skid: the Cam Spray MCB3040H runs a 389cc Honda engine to 3,000 PSI at 4 GPM, 12,000 cleaning units, with a diesel...

The Cam Spray MCB3535H is the higher pressure sibling of the MCB3040H on the same movable skid: a 13 HP 390cc Honda makes 3,500 PSI at 3.5 GPM, and...

The Cam Spray MCB4050V is the hot water skid for a contractor who moves the rig from truck to van to trailer: a 16 HP 479cc Briggs and Stratton eng...

The Cam Spray MCB5055H is the 5,000 PSI hot water skid for stripping work: a 22 HP 688cc Honda V twin drives the triplex pump to 5,000 PSI at 5.5 G...

The Cam Spray UV3040H-HOT is the Honda powered trailer for a mobile washer who works alone: 3,000 PSI at 4 GPM is enough for trucks, equipment and ...

The Cam Spray UV4050V-HOT is the tow behind hot water rig with a Briggs and Stratton Vanguard engine: 16 horsepower from 479cc drives a triplex pum...

Home delivery with liftgate service for one freight machine: the carrier brings the crate to a residential address and lowers it to the ground at t...

The Kranzle 1122TST is the compact Kranzle for detailers: a 1.5 HP motor drives the AZL Industrial pump, brass internals and ceramic plungers, to 1...

The Kranzle 97132600 Spray Guard is the shield for close range work with a Kranzle lance: it snaps onto the nozzle end and keeps water and debris d...

The Kranzle 97135303 is the foam cannon for a Kranzle machine: it lays down a thick blanket of foam from the pressure washer flow, an adjustable mi...

The Kranzle 97412598 is the automatic hose reel: a spring loaded drum takes up to 30 meters, about 98 feet, of high pressure hose and winds it back...

The Kranzle 9741262 Butler is the accessory holder for a Kranzle wash station: it keeps the spray gun, the lances and the nozzles upright and withi...

The Kranzle 97412691 is the hose reel that ships complete: the automatic spring retracting reel, 30 meters of high pressure hose, about 98 feet, an...

The Kranzle 9741881 UFO is the flat surface cleaner for a Kranzle machine: it rolls across a driveway, a sidewalk or a garage floor on built in whe...

The Kranzle 97480151 is the 50 foot gray hose made for the Kranzle K Series, the K1122, K2017T and K2020T: fifty feet reaches around a vehicle, acr...

The Kranzle Colly 800 is the push sweeper that sits between a broom and a powered floor scrubber: push it across a warehouse floor, a workshop, a p...

Five gallons a minute from an electric cart is the Kranzle K1200TST: 2,400 PSI at 5.0 GPM through the Kranzle AQ Industrial pump on 230 volt three ...

The Kranzle K1622TS is the lightest Kranzle, 55 pounds and 18 by 7 by 13 inches, small enough to carry by hand: the same brass pump head and cerami...

The Kranzle K2017 is the entry point to a Kranzle pump: a 1.5 HP motor drives the APG Industrial pump, all metal internals, to an adjustable 1,600 ...

The Kranzle K2017T adds a built in hose reel to the K2017: the APG Industrial Kranzle pump and a 1.5 HP motor deliver an adjustable 1,600 PSI at 1....

The Kranzle K2020PMUSR is the wall mounted Kranzle for a detail lane or a wash bay on a standard outlet: a 2 HP motor and the APG Industrial pump d...

The Kranzle K2020T is the 2,000 PSI cart that runs on a standard outlet: a 2 HP motor drives the APG Industrial Kranzle pump, to 2,000 PSI at 1.9 G...

The Kranzle K2160TST is the farm and fleet washer on a roto molded frame: the commercial APG18 pump, self priming with a freeze resistant head that...

The Kranzle K2175TST Therm is the hot water machine for a detail shop or a service bay that runs on 220 volt single phase power and cannot use an e...

The Kranzle K399TST is the detailing pressure washer for a bay with no floor to spare: a 23 by 14 inch footprint standing 33 inches tall, 1,600 PSI...

The Kranzle K499TST is the 2,000 PSI upright that runs on a 120 volt 20 amp circuit: the Kranzle pump delivers 2,000 PSI at 1.9 GPM in the same com...

The Kranzle K599TST is the first upright in the Kranzle TST line to need 220 volt power: the Kranzle pump delivers 2,200 PSI at 2.5 GPM on a 220 vo...

The Kranzle K700TST is the commercial electric that matches a gas machine's output: 2,500 PSI at 3.3 GPM through the Kranzle AQ Industrial pump on ...

The Kranzle KWS1200TS is the 220 volt three phase build of the stationary Kranzle: a 7.5 HP motor drawing 21 amps drives a Kranzle AQ Industrial pu...

The Kranzle KWS1200TS 440V is the stationary Kranzle for a plant wired at 440 volts: the same 7.5 HP motor and AQ Industrial pump as the 220 volt u...

The Kranzle KWS700TS brings the KWS stationary format to a shop that only has 220 volt single phase power: a 5 HP motor drawing 23 amps drives a Kr...