Skip to content

BE Power Equipment

BE Pressure Washers, Hot Water Units and Truck Mounts, Plus Pumps, Generators and Compressors

Not sure which machine fits the job? Answer a few quick questions and see the machines that fit, right here.

Prefer a person? Give us a call at (219) 327-1138. We are available Monday through Friday from 9:00 AM to 6:00 PM EST and one of our representatives will help you with what you're looking for.

Takes under a minute. No email needed to see results.

BE Power Equipment builds more of what a wash truck carries than any other brand here: 95 pressure washers from the 1,700 PSI P series electric units to 5,100 PSI truck mounts and 8.5 GPM hot water machines, plus the soft wash skids, 20 water and trash pumps, 11 portable generators and 5 gas air compressors that ride beside them. Engines are Honda, Kohler and BE's own Powerease; motors are Baldor and TechTop; pumps are AR, General, Comet and CP. All ship new from BE through High Pressure Car Washer, an authorized BE dealer, with free shipping to the lower 48 states, to a dock or terminal on freight machines, and liftgate service for one flat fee.

The model number tells the story: P and PE units are the residential and light commercial electrics, B units are the gas cold water line from 2,500 to 5,100 PSI, X units are the commercial electrics, HW units are hot water, the 67HD and 1250 are the hot water electrics, Z units are hot water skids, and the B series truck mounts carry a TB in the number. The guide under the products walks the line, and each BE product also appears in its category: gas, electric, hot water, pumps, generators, air compressors and soft wash.

Gas pressure washersElectric pressure washersHot water unitsResidential unitsSoft wash systemsWater and trash pumpsPortable generatorsGas air compressors
Start here: the machine we would put on the truck for each job
Home and light commercialBE BE3475PX3,400 PSI at 2.5 GPM, the searched BE model and the driveway machine.ContractorsBE B4213HA4,200 PSI at 4.2 GPM on a Honda engine for daily cold water work.FleetsBE HW4024HA12V4,000 PSI at 5.5 GPM hot water on wheels, Honda GX690.Truck bedsBE B3213HTBAS3,200 PSI at 5.5 GPM truck mount with a belt drive pump.
Compare the be power equipment buyers ask about most
ModelPSIGPMPowerHeatFormBest for
BE P1715EN1,7001.7Electric 120V 1 phaseCold waterPortableCars and patios, standard outlet
BE BE3475PX3,4002.5GasCold waterPortableDriveways and siding
BE B205EA2,0003.5Electric 230V 1 phaseCold waterPortableShops, electric on 230 volt
BE B4213HA4,2004.2GasCold waterPortableContractors, Honda engine
BE HW152EA1,5002Electric 120V 1 phaseDiesel burnerPortableSmall shops, 120 volt hot water
BE 67HD-33,0005Electric 230V 3 phaseNatural gas burnerStationaryIndoor hot water, 3,000 PSI 5 GPM
BE HW255E1CNG2,5003.5Electric 230V 1 phaseNatural gas burnerStationaryKitchens and plants, natural gas heat
BE HW4024HA12V4,0005.5GasDiesel burnerSkidFleets, hot water on wheels
BE HW3524HA12V3,5008.5GasDiesel burnerPortableFleet yards, 8.5 GPM hot
BE B3213HTBAS3,2005.5GasCold waterSkidTruck bed, belt drive cold water
BE Z5535CPBDV3,5005.2GasDiesel burnerSkidTruck bed hot water skid
BE SW1165HZ30011GasCold waterSkidRoofs and siding, soft wash
Filters

BE pressure washers: the gas line

The B series is the gas cold water line, from the BE3475PX at 3,400 PSI and 2.5 GPM, the searched model and the home and light commercial pick, through the B4213HA at 4,200 PSI and 4.2 GPM for contractors, to the 5,100 PSI truck mounts. Honda GX and Kohler engines, AR and General pumps, direct drive and belt drive.

BE electric pressure washers

The P series, such as the P1715EN at 1,700 PSI, is the residential electric line on a standard outlet. The B and X series electrics, such as the B205EA at 2,000 PSI and 3.5 GPM on 230 volt, are the commercial electric units with Baldor motors for shops and bays.

BE hot water pressure washers

The HW series is the gas hot water line with diesel fired burners and 12 volt burner controls, from the HW4024HA12V at 4,000 PSI and 5.5 GPM to the HW3524HA12V at 3,500 PSI and 8.5 GPM, the fleet washer. The 67HD electric hot water units at 3,000 PSI and 5.0 GPM run indoors on 230 volt or three phase, the HW255E1CNG heats with natural gas, and the HW152EA is the 120 volt hot water unit.

BE truck mounts and skids

The B series truck mounts, such as the B3213HTBAS at 3,200 PSI and 5.5 GPM, bolt into a truck bed with a belt drive pump and a Honda engine at a price well under the hot water skids. The Z series, such as the Z5535CPBDV at 3,500 PSI and 5.2 GPM, is the hot water skid.

BE soft wash systems

The SW1165 mobile soft wash skids push 11 GPM at 300 PSI through a diaphragm pump for roof cleaning and house washing, in direct drive and gear drive versions with pull or electric start. They are in soft wash systems.

BE water pumps, generators and air compressors

BE builds the rest of the truck: 1 to 4 inch water, chemical, semi trash and trash pumps in water transfer pumps and trash pumps, 2,800 to 12,500 watt conventional, inverter and tri fuel units in portable generators, and Honda powered compressors and combination units in gas powered air compressors.

BE machines we recommend by job

BE BE3475PX for home and light commercial use

The BE3475PX is 3,400 PSI at 2.5 GPM, the searched model and the driveway machine.

BE B4213HA for contractors

The B4213HA is 4,200 PSI at 4.2 GPM on a Honda engine for daily cold water work.

BE HW4024HA12V for fleets

The HW4024HA12V is 4,000 PSI at 5.5 GPM of hot water on wheels with a Honda GX690.

BE B3213HTBAS for a truck bed

The B3213HTBAS truck mount puts 3,200 PSI and 5.5 GPM in a truck bed with a belt drive pump.

Freight, delivery and returns on machines

Free freight to the lower 48. Machines ship new from the manufacturer by freight carrier at no charge to a commercial address with a loading dock or forklift, or to the carrier's nearest terminal for pickup. Orders are prepared within 0 to 1 business days and delivery takes 5 to 8 business days.

Liftgate service, $95 flat. No dock or forklift? Choose liftgate service when you add the machine to the cart. The carrier calls ahead to schedule, brings the crate to your address and lowers it to the ground with a liftgate. It lands at the curb or driveway, not inside the building. One flat fee per order, whatever the machine weighs.

On delivery. Inspect the crate before signing. Note any damage on the delivery receipt and photograph it. We file the claim with the carrier, and if a replacement is needed we ship it.

Returns. Unused machines in original packaging can be returned within 30 days of delivery. A 20 percent restocking fee applies and return freight is the buyer's responsibility, and a refused freight delivery is handled the same way, which is why we would rather confirm the model before it ships: send the job, the water and the power on site through the form on this page and we check the spec against the machine. Full terms are on the shipping policy and return policy pages.

Not sure which machine fits the job? Answer a few quick questions and see the machines that fit, right here.

Prefer a person? Give us a call at (219) 327-1138. We are available Monday through Friday from 9:00 AM to 6:00 PM EST and one of our representatives will help you with what you're looking for.

Takes under a minute. No email needed to see results.

BE Power Equipment questions, answered

What does BE Power Equipment make?
Pressure washers from 1,700 to 5,100 PSI in gas, electric, hot water, skid and truck mount form, soft wash systems, water and trash pumps, portable generators and gas air compressors. All of it is on this page.
Which engines do BE pressure washers use?
Honda GX and Kohler on most commercial units, and BE's own Powerease engine on the value units and pumps. Electric units use Baldor and TechTop motors.
Which BE pressure washer is best for home use?
The BE3475PX at 3,400 PSI for driveways and siding, or a P series electric unit such as the P1715EN for cars and patios.
Does BE make hot water pressure washers?
Yes. The HW series gas units with diesel fired burners, the 67HD and HW255 electric hot water units, and the Z series hot water skids.
Are you an authorized BE Power Equipment dealer?
Yes. High Pressure Car Washer is an authorized dealer for BE Power Equipment and five other brands, and every unit ships new from the manufacturer with its factory warranty.
How does shipping work?
Shipping is free to the lower 48 states. Machines ship new from the manufacturer by freight carrier to a commercial address with a dock or forklift, or to the carrier's nearest terminal for pickup. No dock? Choose liftgate service when you add the machine to the cart, a flat $95 per order, and the carrier calls ahead and lowers the crate to the ground at your address. Orders are prepared within 0 to 1 business days and delivery takes 5 to 8 business days.
What if I order the wrong machine?
Returns are accepted within 30 days of delivery on unused units in original packaging. A 20 percent restocking fee applies and return freight is the buyer's responsibility. Find My Machine and the phone line exist so the model is confirmed before it ships.