Skip to content

Cam Spray Pressure Washers

Cam Spray Power Washers: Wall Mount, Stationary, Natural Gas Hot Water and Trailers

Not sure which machine fits the job? Answer a few quick questions and see the machines that fit, right here.

Prefer a person? Give us a call at (219) 327-1138. We are available Monday through Friday from 9:00 AM to 6:00 PM EST and one of our representatives will help you with what you're looking for.

Takes under a minute. No email needed to see results.

Cam Spray builds the machines that get installed rather than wheeled around: wall mount and stationary electric pressure washers for wash bays, dealerships, plants and food processing, hot water units heated by natural gas, propane or diesel, and the trailers, skids and hydraulic drive units that go where a building is not. The 127 Cam Spray machines here run from the 1,000 PSI 1000 series to 7,000 PSI industrial units, 91 of them electric, 42 hot water, on Baldor and WEG motors and General and AR pumps, built in Iowa. All ship new from Cam Spray through High Pressure Car Washer, an authorized Cam Spray dealer, with free shipping to the lower 48 states, to a dock or terminal on freight machines, and liftgate service for one flat fee.

The model number carries the spec: the first digits are the PSI class, 1000, 1500, 2000, 3000, 4040 and up, and the letters say what it is. WM is a wall mount, STLEF and STNEF are propane and natural gas fired stationary hot water units, SHDE is an electric unit with a diesel fired burner, X and A are portables, QB is the gas hot water portable, MCB is a skid, TM and TMD are truck mounts, HT, BT, DTE and DXE are trailers, HYD is hydraulic drive. The guide under the products goes line by line; every Cam Spray machine also appears in electric, hot water, gas, diesel or hydraulic drive.

Electric pressure washersHot water unitsCommercial rangeGas unitsDiesel unitsHydraulic driveSteam capable
Start here: the machine we would put on the truck for each job
Wash baysCam Spray 3000WM/SS3,000 PSI at 4 GPM on the wall in a stainless cabinet.Plants and kitchensCam Spray 3000STNEF3,000 PSI at 4 GPM natural gas fired stationary hot water.Portable electricCam Spray 4040X4,000 PSI at 4 GPM on wheels, three phase.TrucksCam Spray MCB3040D3,000 PSI at 4 GPM diesel engine hot water skid.
Compare the cam spray pressure washers buyers ask about most
ModelPSIGPMPowerHeatFormBest for
Cam Spray 1500A1,4502Electric 120V 1 phaseCold waterPortableParts washing and light bays, portable
Cam Spray 1500WM1,5003Electric 230V 1 phaseCold waterWall MountLight bays, wall mount
Cam Spray 3000WM/SS3,0004Electric 230V 1 phaseCold waterWall MountWash bays, stainless wall mount
Cam Spray 4040EWMA4,0004Electric 230V 1 phaseCold waterWall MountConcrete and equipment, wall mount
Cam Spray 4040X4,0004Electric 230V 1 phaseCold waterPortablePortable electric, 4,000 PSI
Cam Spray 2000SHDE2,0004Electric 230V 1 phaseDiesel burnerPortableIndoor hot water, diesel burner
Cam Spray 3000STNEF3,0004Electric 230V 1 phaseNatural gas burnerStationaryPlants and kitchens, natural gas heat
Cam Spray 4040QB4,0004GasDiesel burnerPortableHot water with no outlet, gas
Cam Spray MCB3040D3,0004DieselDiesel burnerSkidService trucks, diesel hot skid
Cam Spray 4055TM4,0005.5GasCold waterSkidTruck mount cold water, 5.5 GPM
Cam Spray 3000HT3,0004GasCold waterTrailerTow behind, gas
Cam Spray 5055HYD5,0005.5HydraulicCold waterStationarySkid steers and vac trucks, hydraulic
Filters

Cam Spray wall mount pressure washers

Thirty three wall mount units, the largest wall mount range on the site. The pump and motor hang on the wall in a steel or stainless cabinet, the hose runs to a reel, and the floor of the bay stays clear. From the 1,000 PSI 1000WM to the 3000WM/SS at 3,000 PSI and 4 GPM in stainless and the 4040EWMA at 4,000 PSI, on 120 volt through three phase. This is the car wash prep bay and dealership machine.

Cam Spray electric pressure washers

Ninety two electric units: portables such as the 1500A deluxe portable and the 4040X at 4,000 PSI, base mount stationary units, and the wall mounts above. Baldor and WEG motors from 1.5 HP on 120 volt to 20 HP on three phase; every product page lists the voltage and phase.

Cam Spray 1500 series

The 1500 series is the 1,500 PSI class that shops buy for parts washing, kitchens and light bays: the 1500A and 1500AX portables, the 1500WM wall mounts, the 1500GEAR base mount, and the 1500SHDE, STLEF and STNEF hot water versions, most of them on 120 volt or 230 volt single phase.

Cam Spray hot water pressure washers

Forty two hot water units in three heat sources. Diesel fired burners on electric units, the SHDE line such as the 2000SHDE at 2,000 PSI and 4 GPM, and on gas units such as the 4040QB portable. Natural gas and propane burners on the stationary STNEF and STLEF units such as the 3000STNEF, the plant and kitchen machines that connect to a building gas line and run indoors with a flue. Diesel engine skids such as the MCB3040D for trucks.

Cam Spray natural gas pressure washers

Ten natural gas fired units and eight propane fired units, all stationary electric hot water machines from 1,000 to 4,000 PSI. They never need fuel delivered, vent through a flue, and are the food plant, dairy and commercial kitchen answer. Also listed in hot water pressure washers.

Cam Spray trailers, truck mounts and hydraulic units

Nine trailer units, gas such as the 3000HT and diesel such as the 3000DXE, arrive with a tank and reel. Truck mounts such as the 4055TM at 4,000 PSI and 5.5 GPM bolt into a bed. The 304HYD, 404HYD and 5055HYD run from a skid steer or vac truck hydraulic system.

Cam Spray machines we recommend by job

Cam Spray 3000WM/SS for wash bays

The 3000WM/SS wall mount puts 3,000 PSI and 4 GPM on the wall in a stainless cabinet.

Cam Spray 3000STNEF for plants and kitchens

The 3000STNEF is a 3,000 PSI 4 GPM natural gas fired stationary hot water unit.

Cam Spray 4040X for a portable electric unit

The 4040X rolls 4,000 PSI and 4 GPM between bays on three phase power.

Cam Spray MCB3040D for trucks

The MCB3040D is a 3,000 PSI 4 GPM diesel engine hot water skid for a service truck.

Freight, delivery and returns on machines

Free freight to the lower 48. Machines ship new from the manufacturer by freight carrier at no charge to a commercial address with a loading dock or forklift, or to the carrier's nearest terminal for pickup. Orders are prepared within 0 to 1 business days and delivery takes 5 to 8 business days.

Liftgate service, $95 flat. No dock or forklift? Choose liftgate service when you add the machine to the cart. The carrier calls ahead to schedule, brings the crate to your address and lowers it to the ground with a liftgate. It lands at the curb or driveway, not inside the building. One flat fee per order, whatever the machine weighs.

On delivery. Inspect the crate before signing. Note any damage on the delivery receipt and photograph it. We file the claim with the carrier, and if a replacement is needed we ship it.

Returns. Unused machines in original packaging can be returned within 30 days of delivery. A 20 percent restocking fee applies and return freight is the buyer's responsibility, and a refused freight delivery is handled the same way, which is why we would rather confirm the model before it ships: send the job, the water and the power on site through the form on this page and we check the spec against the machine. Full terms are on the shipping policy and return policy pages.

Not sure which machine fits the job? Answer a few quick questions and see the machines that fit, right here.

Prefer a person? Give us a call at (219) 327-1138. We are available Monday through Friday from 9:00 AM to 6:00 PM EST and one of our representatives will help you with what you're looking for.

Takes under a minute. No email needed to see results.

Cam Spray Pressure Washers questions, answered

Where are Cam Spray pressure washers made?
Cam Spray builds in Iowa on Baldor and WEG motors, Honda and Kohler engines and General and AR pumps, and sells through dealers with parts support.
What do the Cam Spray model numbers mean?
The digits are the PSI class and the letters say the type: WM wall mount, STLEF propane and STNEF natural gas stationary hot water, SHDE diesel fired electric hot water, X and A portables, QB gas hot water, MCB skid, TM and TMD truck mount, HT, BT, DTE and DXE trailers, HYD hydraulic drive.
Can a Cam Spray hot water unit run indoors?
The natural gas and propane fired stationary units are built for it with a flue. The diesel fired SHDE units need a vented bay. Gas and diesel engine units belong outdoors or on a truck.
Which Cam Spray unit is best for a car wash?
A wall mount in the 2,000 to 3,000 PSI class with 4 GPM, such as the 3000WM/SS, on the voltage the bay has. Add a hot water unit if the bay does engines and wheels.
Are you an authorized Cam Spray dealer?
Yes. High Pressure Car Washer is an authorized dealer for Cam Spray and five other brands, and every unit ships new from the manufacturer with its factory warranty.
How does shipping work?
Shipping is free to the lower 48 states. Machines ship new from the manufacturer by freight carrier to a commercial address with a dock or forklift, or to the carrier's nearest terminal for pickup. No dock? Choose liftgate service when you add the machine to the cart, a flat $95 per order, and the carrier calls ahead and lowers the crate to the ground at your address. Orders are prepared within 0 to 1 business days and delivery takes 5 to 8 business days.
What if I order the wrong machine?
Returns are accepted within 30 days of delivery on unused units in original packaging. A 20 percent restocking fee applies and return freight is the buyer's responsibility. Find My Machine and the phone line exist so the model is confirmed before it ships.